@@ -41,3 +41,7 @@ &uart1 {
clocks = <&uart_clk>;
clock-names = "apb_pclk";
};
+
+&gpio {
+ status = "okay";
+};
@@ -157,6 +157,33 @@ pmux: pmux@24190000 {
reg = <0 0x24190000 0 0x10000>;
};
+ gpio: gpio@28020000 {
+ compatible = "toshiba,gpio-visconti";
+ reg = <0 0x28020000 0 0x1000>;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&pmux 0 0 32>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts =
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
uart0: serial@28200000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0 0x28200000 0 0x1000>;
Add the GPIO node in Toshiba Visconti5 SoC-specific DT file. And enable the GPIO node in TMPV7708 RM main board's board-specific DT file. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> --- .../boot/dts/toshiba/tmpv7708-rm-mbrc.dts | 4 +++ arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 27 +++++++++++++++++++ 2 files changed, 31 insertions(+)