diff mbox series

[1/2] arm64: dts: freescale: update calibration table for TMU module

Message ID 20201117034305.42546-1-andy.tang@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: freescale: update calibration table for TMU module | expand

Commit Message

Andy Tang Nov. 17, 2020, 3:43 a.m. UTC
From: Yuantian Tang <andy.tang@nxp.com>

Update the calibration table to make the temperature more accurate.
Three platforms have been updated: ls1012a, ls1043a and ls1046a.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
 .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 63 ++++++++-------
 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 78 ++++++++++---------
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 72 +++++++++--------
 3 files changed, 112 insertions(+), 101 deletions(-)

Comments

Shawn Guo Nov. 30, 2020, 9:36 a.m. UTC | #1
On Tue, Nov 17, 2020 at 11:43:04AM +0800, andy.tang@nxp.com wrote:
> From: Yuantian Tang <andy.tang@nxp.com>
> 
> Update the calibration table to make the temperature more accurate.
> Three platforms have been updated: ls1012a, ls1043a and ls1046a.
> 
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>

Applied both, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 5be686a0de54..b3683cda7f5b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -293,43 +293,46 @@ 
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
-			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
+			fsl,tmu-calibration = <0x00000000 0x00000025
+					       0x00000001 0x0000002c
 					       0x00000002 0x00000032
 					       0x00000003 0x00000039
 					       0x00000004 0x0000003f
 					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x0000005f
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006c
+
+					       0x00010000 0x00000026
+					       0x00010001 0x0000002d
 					       0x00010002 0x00000035
 					       0x00010003 0x0000003d
 					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+					       0x00010005 0x0000004d
+					       0x00010006 0x00000055
+					       0x00010007 0x0000005d
+					       0x00010008 0x00000065
+					       0x00010009 0x0000006d
+
+					       0x00020000 0x00000026
+					       0x00020001 0x00000030
+					       0x00020002 0x0000003a
+					       0x00020003 0x00000044
+					       0x00020004 0x0000004e
+					       0x00020005 0x00000059
+					       0x00020006 0x00000063
+
+					       0x00030000 0x00000014
+					       0x00030001 0x00000021
+					       0x00030002 0x0000002e
+					       0x00030003 0x0000003a
+					       0x00030004 0x00000047
+					       0x00030005 0x00000053
+					       0x00030006 0x00000060>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index d5d219311161..bbae4b353d3f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -403,43 +403,47 @@ 
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
-			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration = <0x00000000 0x00000023
+					       0x00000001 0x0000002a
+					       0x00000002 0x00000031
+					       0x00000003 0x00000037
+					       0x00000004 0x0000003e
+					       0x00000005 0x00000044
+					       0x00000006 0x0000004b
+					       0x00000007 0x00000051
+					       0x00000008 0x00000058
+					       0x00000009 0x0000005e
+					       0x0000000a 0x00000065
+					       0x0000000b 0x0000006b
+
+					       0x00010000 0x00000023
+					       0x00010001 0x0000002b
+					       0x00010002 0x00000033
+					       0x00010003 0x0000003b
+					       0x00010004 0x00000043
+					       0x00010005 0x0000004b
+					       0x00010006 0x00000054
+					       0x00010007 0x0000005c
+					       0x00010008 0x00000064
+					       0x00010009 0x0000006c
+
+					       0x00020000 0x00000021
+					       0x00020001 0x0000002c
+					       0x00020002 0x00000036
+					       0x00020003 0x00000040
+					       0x00020004 0x0000004b
+					       0x00020005 0x00000055
+					       0x00020006 0x0000005f
+
+					       0x00030000 0x00000013
+					       0x00030001 0x0000001d
+					       0x00030002 0x00000028
+					       0x00030003 0x00000032
+					       0x00030004 0x0000003d
+					       0x00030005 0x00000047
+					       0x00030006 0x00000052
+					       0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 1fa39bacff4b..025e1f587662 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -400,45 +400,49 @@ 
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
-			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000026
-				0x00000001 0x0000002d
-				0x00000002 0x00000032
-				0x00000003 0x00000039
-				0x00000004 0x0000003f
-				0x00000005 0x00000046
-				0x00000006 0x0000004d
-				0x00000007 0x00000054
-				0x00000008 0x0000005a
-				0x00000009 0x00000061
-				0x0000000a 0x0000006a
-				0x0000000b 0x00000071
+				<0x00000000 0x00000023
+				0x00000001 0x00000029
+				0x00000002 0x0000002f
+				0x00000003 0x00000036
+				0x00000004 0x0000003c
+				0x00000005 0x00000042
+				0x00000006 0x00000049
+				0x00000007 0x0000004f
+				0x00000008 0x00000055
+				0x00000009 0x0000005c
+				0x0000000a 0x00000062
+				0x0000000b 0x00000068
 				/* Calibration data group 2 */
-				0x00010000 0x00000025
-				0x00010001 0x0000002c
-				0x00010002 0x00000035
-				0x00010003 0x0000003d
-				0x00010004 0x00000045
-				0x00010005 0x0000004e
-				0x00010006 0x00000057
-				0x00010007 0x00000061
-				0x00010008 0x0000006b
-				0x00010009 0x00000076
+				0x00010000 0x00000022
+				0x00010001 0x0000002a
+				0x00010002 0x00000032
+				0x00010003 0x0000003a
+				0x00010004 0x00000042
+				0x00010005 0x0000004a
+				0x00010006 0x00000052
+				0x00010007 0x0000005a
+				0x00010008 0x00000062
+				0x00010009 0x0000006a
 				/* Calibration data group 3 */
-				0x00020000 0x00000029
-				0x00020001 0x00000033
-				0x00020002 0x0000003d
-				0x00020003 0x00000049
-				0x00020004 0x00000056
-				0x00020005 0x00000061
-				0x00020006 0x0000006d
+				0x00020000 0x00000021
+				0x00020001 0x0000002b
+				0x00020002 0x00000035
+				0x00020003 0x0000003e
+				0x00020004 0x00000048
+				0x00020005 0x00000052
+				0x00020006 0x0000005c
 				/* Calibration data group 4 */
-				0x00030000 0x00000021
-				0x00030001 0x0000002a
-				0x00030002 0x0000003c
-				0x00030003 0x0000004e>;
+				0x00030000 0x00000011
+				0x00030001 0x0000001a
+				0x00030002 0x00000024
+				0x00030003 0x0000002e
+				0x00030004 0x00000038
+				0x00030005 0x00000042
+				0x00030006 0x0000004c
+				0x00030007 0x00000056>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};