From patchwork Wed Nov 18 08:21:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?Q2h1bmZlbmcgWXVuICjkupHmmKXls7Ap?= X-Patchwork-Id: 11914215 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.7 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,UNPARSEABLE_RELAY, URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id CA793C56202 for ; Wed, 18 Nov 2020 08:26:23 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 4A23620867 for ; Wed, 18 Nov 2020 08:26:23 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="3BHhGFVY"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mediatek.com header.i=@mediatek.com header.b="DaDMTxay" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 4A23620867 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:Message-ID:Date:Subject:To:From: Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender :Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References:List-Owner; bh=bhzOY7ikV2qw8YSUOwQJhd0Q9y2BwqstLNeIWkJXR6o=; b=3BHhGFVY+lER29hmP9Y5Q5WQSD 2b7clYnm4Ic9WtJ7QXk6tNwdWFG2n4rL3Siizp2Yk/pDAT2GlbUsLC6nT9i161kHK9BSj3rDombxV DYuD0KRg2bmK0p5bTjbMJNeLeQZCtXKuWqJ3V/pgk2WPttRmvwE934XvMY4OKrsi9N1FDO5Ry6yxu iJmlaZuAnWeU2cItKfdeGaiXI8455r/HD4My/fGIHfgEyXB2RF8LgKbbrR+FZxIJwB9XQo0aOhMPX 3Y1sT5V21IevxJsYwf3M5W9rTW639Uw44YfIPHHNte4/IYqi7WaUcmDAmvfzZwWRwU6LYM9K2/Fou AeGec9EQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kfImn-000107-7q; Wed, 18 Nov 2020 08:25:53 +0000 Received: from mailgw01.mediatek.com ([216.200.240.184]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kfImU-0000rg-1E; Wed, 18 Nov 2020 08:25:36 +0000 X-UUID: a4a8f0b4b7364246963c1ba074ab3c79-20201118 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:Message-ID:Date:Subject:CC:To:From; bh=COGcOR6fqFYspjo9p10gF4BB5nEoYjbO9bzOkTyVB58=; b=DaDMTxayK6zsSwivDiqecNPhhnJPKoAs6psMuW73v3B7JstVCqpxyeCWqL+zl0vxKDjMnH2dW2QZm7W+WnAzeSXZSBaRU2fbskqQl2BqNGRDb+N2eUOMyiG6U0u7ymAXDCkV9WQner2WDBERV9yXhgkUeexdNAxib4bUVNPnyQI=; X-UUID: a4a8f0b4b7364246963c1ba074ab3c79-20201118 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw01.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 1976399466; Wed, 18 Nov 2020 00:25:27 -0800 Received: from mtkmbs05n2.mediatek.inc (172.21.101.140) by MTKMBS62N1.mediatek.inc (172.29.193.41) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 18 Nov 2020 00:21:46 -0800 Received: from mtkcas11.mediatek.inc (172.21.101.40) by mtkmbs05n2.mediatek.inc (172.21.101.140) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 18 Nov 2020 16:21:44 +0800 Received: from mtkslt301.mediatek.inc (10.21.14.114) by mtkcas11.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Wed, 18 Nov 2020 16:21:44 +0800 From: Chunfeng Yun To: Rob Herring Subject: [PATCH v3 01/11] dt-bindings: usb: convert usb-device.txt to YAML schema Date: Wed, 18 Nov 2020 16:21:16 +0800 Message-ID: <20201118082126.42701-1-chunfeng.yun@mediatek.com> X-Mailer: git-send-email 2.18.0 MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201118_032534_317754_9269C243 X-CRM114-Status: GOOD ( 25.84 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Chun-Kuang Hu , Min Guo , Philipp Zabel , devicetree@vger.kernel.org, David Airlie , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Kishon Vijay Abraham I , Serge Semin , Matthias Brugger , Vinod Koul , linux-mediatek@lists.infradead.org, Daniel Vetter , netdev@vger.kernel.org, Chunfeng Yun , Jakub Kicinski , Stanley Chu , "David S . Miller" , linux-arm-kernel@lists.infradead.org Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Convert usb-device.txt to YAML schema usb-device.yaml Signed-off-by: Chunfeng Yun --- v3: 1. remove $nodenmae and items key word for compatilbe; 2. add additionalProperties; The followings are suggested by Rob: 3. merge the following patch [v2,1/4] dt-bindings: usb: convert usb-device.txt to YAML schema [v2,2/4] dt-bindings: usb: add properties for hard wired devices 4. define the unit-address for hard-wired device in usb-hcd.yaml, also define its 'reg' and 'compatible'; 5. This series is base on Serge's series: https://patchwork.kernel.org/project/linux-usb/cover/20201111090853.14112-1-Sergey.Semin@baikalelectronics.ru/ [v4,00/18] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema v2 changes suggested by Rob: 1. modify pattern to support any USB class 2. convert usb-device.txt into usb-device.yaml --- .../devicetree/bindings/usb/usb-device.txt | 102 -------------- .../devicetree/bindings/usb/usb-device.yaml | 125 ++++++++++++++++++ .../devicetree/bindings/usb/usb-hcd.yaml | 33 +++++ 3 files changed, 158 insertions(+), 102 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-device.yaml diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt deleted file mode 100644 index 036be172b1ae..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ /dev/null @@ -1,102 +0,0 @@ -Generic USB Device Properties - -Usually, we only use device tree for hard wired USB device. -The reference binding doc is from: -http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps - -Four types of device-tree nodes are defined: "host-controller nodes" -representing USB host controllers, "device nodes" representing USB devices, -"interface nodes" representing USB interfaces and "combined nodes" -representing simple USB devices. - -A combined node shall be used instead of a device node and an interface node -for devices of class 0 or 9 (hub) with a single configuration and a single -interface. - -A "hub node" is a combined node or an interface node that represents a USB -hub. - - -Required properties for device nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for device nodes with interface nodes: -- #address-cells: shall be 2 -- #size-cells: shall be 0 - - -Required properties for interface nodes: -- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is - the product id, CN is the configuration value and IN is the interface - number. The textual representation of VID, PID, CN and IN shall be in lower - case hexadecimal with leading zeroes suppressed. The other compatible - strings from the above standard binding could also be used, but a device - adhering to this binding may leave out all except for - "usbifVID,PID.configCN.IN". -- reg: the interface number and configuration value - -The configuration component is not included in the textual representation of -an interface-node unit address for configuration 1. - - -Required properties for combined nodes: -- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. - The textual representation of VID and PID shall be in lower case hexadecimal - with leading zeroes suppressed. The other compatible strings from the above - standard binding could also be used, but a device adhering to this binding - may leave out all except for "usbVID,PID". -- reg: the number of the USB hub port or the USB host-controller port to which - this device is attached. The range is 1-255. - - -Required properties for hub nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Required properties for host-controller nodes with device nodes: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - - -Example: - -&usb1 { /* host controller */ - #address-cells = <1>; - #size-cells = <0>; - - hub@1 { /* hub connected to port 1 */ - compatible = "usb5e3,608"; - reg = <1>; - }; - - device@2 { /* device connected to port 2 */ - compatible = "usb123,4567"; - reg = <2>; - }; - - device@3 { /* device connected to port 3 */ - compatible = "usb123,abcd"; - reg = <3>; - - #address-cells = <2>; - #size-cells = <0>; - - interface@0 { /* interface 0 of configuration 1 */ - compatible = "usbif123,abcd.config1.0"; - reg = <0 1>; - }; - - interface@0,2 { /* interface 0 of configuration 2 */ - compatible = "usbif123,abcd.config2.0"; - reg = <0 2>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml new file mode 100644 index 000000000000..f31d8a85d3e6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-device.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the Generic USB Device + +maintainers: + - Greg Kroah-Hartman + +description: | + Usually, we only use device tree for hard wired USB device. + The reference binding doc is from: + http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + + Four types of device-tree nodes are defined: "host-controller nodes" + representing USB host controllers, "device nodes" representing USB devices, + "interface nodes" representing USB interfaces and "combined nodes" + representing simple USB devices. + + A combined node shall be used instead of a device node and an interface node + for devices of class 0 or 9 (hub) with a single configuration and a single + interface. + + A "hub node" is a combined node or an interface node that represents a USB + hub. + +properties: + compatible: + pattern: "^usb[0-9a-f]+,[0-9a-f]+$" + description: Device nodes or combined nodes. + "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case + hexadecimal with leading zeroes suppressed. The other compatible + strings from the above standard binding could also be used, + but a device adhering to this binding may leave out all except + for "usbVID,PID". + + reg: + description: the number of the USB hub port or the USB host-controller + port to which this device is attached. The range is 1-255. + maxItems: 1 + + "#address-cells": + description: should be 1 for hub nodes with device nodes, + should be 2 for device nodes with interface nodes. + enum: [1, 2] + + "#size-cells": + const: 0 + +patternProperties: + "^interface@[0-9]+(,[0-9]+)$": + type: object + description: USB interface nodes. + The configuration component is not included in the textual + representation of an interface-node unit address for configuration 1. + + properties: + compatible: + pattern: "^usbif[0-9a-f]+,[0-9a-f]+.config[0-9a-f]+.[0-9a-f]+$" + description: Interface nodes. + "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is + the product id, CN is the configuration value and IN is the interface + number. The textual representation of VID, PID, CN and IN shall be + in lower case hexadecimal with leading zeroes suppressed. + The other compatible strings from the above standard binding could + also be used, but a device adhering to this binding may leave out + all except for "usbifVID,PID.configCN.IN". + + reg: + description: should be 2 cells long, the first cell represents + the interface number and the second cell represents the + configuration value. + maxItems: 1 + +required: + - compatile + - reg + +additionalProperties: true + +examples: + #hub connected to port 1 + #device connected to port 2 + #device connected to port 3 + # interface 0 of configuration 1 + # interface 0 of configuration 2 + - | + usb@11270000 { + compatible = "generic-xhci"; + reg = <0x11270000 0x1000>; + interrupts = <0x0 0x4e 0x0>; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,608"; + reg = <1>; + }; + + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; + + device@3 { + compatible = "usb123,abcd"; + reg = <3>; + + #address-cells = <2>; + #size-cells = <0>; + + interface@0 { + compatible = "usbif123,abcd.config1.0"; + reg = <0 1>; + }; + + interface@0,2 { + compatible = "usbif123,abcd.config2.0"; + reg = <0 2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 9881ac10380d..5d0c6b5500d6 100755 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -23,6 +23,32 @@ properties: targeted hosts (non-PC hosts). type: boolean + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]+$": + type: object + description: The hard wired USB devices + + properties: + compatible: + pattern: "^usb[0-9a-f]+,[0-9a-f]+$" + $ref: /usb/usb-device.yaml + description: the string is 'usbVID,PID', where VID is the vendor id + and PID is the product id + + reg: + $ref: /usb/usb-device.yaml + maxItems: 1 + + required: + - compatible + - reg + additionalProperties: true examples: @@ -30,4 +56,11 @@ examples: usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; };