| Message ID | 20201125161815.2361-2-lukma@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] ARM: dts: imx28: Fix label name for L2 switch | expand |
On Wed, Nov 25, 2020 at 05:18:14PM +0100, Lukasz Majewski wrote: > From: Mans Rullgard <mans@mansr.com> > > Add pinmux setting for USB1 overcurrent on pwm2 pad. > > Signed-off-by: Mans Rullgard <mans@mansr.com> Lukasz, You need to add your SoB. Shawn > --- > arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 6e7531b64bf7..6d24546f0abe 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -948,6 +948,16 @@ > fsl,pull-up = <MXS_PULL_DISABLE>; > }; > > + usb1_pins_b: usb1@1 { > + reg = <1>; > + fsl,pinmux-ids = < > + MX28_PAD_PWM2__USB1_OVERCURRENT > + >; > + fsl,drive-strength = <MXS_DRIVE_12mA>; > + fsl,voltage = <MXS_VOLTAGE_HIGH>; > + fsl,pull-up = <MXS_PULL_DISABLE>; > + }; > + > usb0_id_pins_a: usb0id@0 { > reg = <0>; > fsl,pinmux-ids = < > -- > 2.20.1 >
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 6e7531b64bf7..6d24546f0abe 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -948,6 +948,16 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + usb1_pins_b: usb1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_PWM2__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = <