| Message ID | 20201202121241.109952-6-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini | expand |
On Wed, Dec 02, 2020 at 05:42:36PM +0530, Jagan Teki wrote: > i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam. > > EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive > Evaluation Board from Engicam. > > i.Core MX8M Mini needs to mount on top of this Evaluation board for > creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. > > Add support for it. > > Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../imx8mm-engicam-icore-mx8mm-edimm2.2.dts | 21 +++++++++++++++++++ > 2 files changed, 22 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 6f0777ee6cd6..4369d783dade 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-engicam-icore-mx8mm-edimm2.2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts > new file mode 100644 > index 000000000000..a8afc0998fcd > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts > @@ -0,0 +1,21 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2019 NXP > + * Copyright (c) 2019 Engicam srl > + * Copyright (c) 2020 Amarula Solutions(India) > + */ > + > +/dts-v1/; > +#include "imx8mm.dtsi" imx8mm should be included in the SoM, not here. It's really wrong that you override some nodes in imx8mm-engicam-icore-mx8mm.dtsi which do not exist there (not included). > +#include "imx8mm-engicam-edimm2.2.dtsi" > +#include "imx8mm-engicam-icore-mx8mm.dtsi" > + > +/ { > + model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit"; > + compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", This won't validate against your own bindings. Please fix either the DTS or the bindings. Then run dtbs_check. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6f0777ee6cd6..4369d783dade 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-engicam-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts new file mode 100644 index 000000000000..a8afc0998fcd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-icore-mx8mm-edimm2.2.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "imx8mm.dtsi" +#include "imx8mm-engicam-edimm2.2.dtsi" +#include "imx8mm-engicam-icore-mx8mm.dtsi" + +/ { + model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm", + "fsl,imx8mm"; + + chosen { + stdout-path = &uart2; + }; +};