diff mbox series

[v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

Message ID 20201209220903.27058-1-lukma@denx.de (mailing list archive)
State New, archived
Headers show
Series [v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 | expand

Commit Message

Lukasz Majewski Dec. 9, 2020, 10:09 p.m. UTC 
From: Mans Rullgard <mans@mansr.com>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
Changes for v2:
- Add S-o-B
---
 arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Lukasz Majewski Dec. 22, 2020, 5:41 p.m. UTC | #1 
Hi Shawn,

> From: Mans Rullgard <mans@mansr.com>
> 
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
> 

Gentle ping on this patch.

> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>
> ---
> Changes for v2:
> - Add S-o-B
> ---
>  arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx28.dtsi
> b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -948,6 +948,16 @@
>  					fsl,pull-up =
> <MXS_PULL_DISABLE>; };
>  
> +				usb1_pins_b: usb1@1 {
> +					reg = <1>;
> +					fsl,pinmux-ids = <
> +
> MX28_PAD_PWM2__USB1_OVERCURRENT
> +					>;
> +					fsl,drive-strength =
> <MXS_DRIVE_12mA>;
> +					fsl,voltage =
> <MXS_VOLTAGE_HIGH>;
> +					fsl,pull-up =
> <MXS_PULL_DISABLE>;
> +				};
> +
>  				usb0_id_pins_a: usb0id@0 {
>  					reg = <0>;
>  					fsl,pinmux-ids = <




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Fabio Estevam Dec. 22, 2020, 5:43 p.m. UTC | #2 
On Wed, Dec 9, 2020 at 7:10 PM Lukasz Majewski <lukma@denx.de> wrote:
>
> From: Mans Rullgard <mans@mansr.com>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Shawn Guo Jan. 7, 2021, 3:27 a.m. UTC | #3 
On Wed, Dec 09, 2020 at 11:09:03PM +0100, Lukasz Majewski wrote:
> From: Mans Rullgard <mans@mansr.com>
> 
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
> 
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@ 
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				usb0_id_pins_a: usb0id@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <