diff mbox series

[05/18] ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family

Message ID 20201210212534.216197-5-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series [01/18] ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 | expand

Commit Message

Krzysztof Kozlowski Dec. 10, 2020, 9:25 p.m. UTC
The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 15dfdfad2d4a ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series


diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index d75f554efde0..fc77c1bfd844 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -665,7 +665,7 @@  &i2c_7 {
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;