| Message ID | 20201214025946.25753-2-chris.ruehl@gtsys.com.hk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | rockchip: emmc: rk3399 add vendor prefix | expand |
On Sun, Dec 13, 2020 at 9:00 PM Chris Ruehl <chris.ruehl@gtsys.com.hk> wrote: > > Update the documentation and add the vendor prefix to the optional > properties referred in vendor-prefixes.yaml. > > Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> > --- > .../bindings/phy/rockchip-emmc-phy.txt | 19 ++++++++++--------- > 1 file changed, 10 insertions(+), 9 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > index 00aa2d349e55..3a55d8086868 100644 > --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > @@ -13,14 +13,15 @@ Optional properties: > access to it), it is strongly suggested. > See ../clock/clock-bindings.txt for details. > - clocks: Should have a phandle to the card clock exported by the SDHCI driver. > - - drive-impedance-ohm: Specifies the drive impedance in Ohm. > - Possible values are 33, 40, 50, 66 and 100. > - If not set, the default value of 50 will be applied. > - - enable-strobe-pulldown: Enable internal pull-down for the strobe line. > - If not set, pull-down is not used. > - - output-tapdelay-select: Specifies the phyctrl_otapdlysec register. > - If not set, the register defaults to 0x4. > - Maximum value 0xf. > + - rockchip,drive-impedance-ohm: Specifies the drive impedance in Ohm. > + Possible values are 33, 40, 50, 66 and 100. > + If not set, the default value of 50 will be > + applied. You can't change this one, it's already an ABI. Only what just got queued can be changed. > + - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe > + line. If not set, pull-down is not used. > + - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register. > + If not set, the register defaults to 0x4. > + Maximum value 0xf. > > Example: > > @@ -37,7 +38,7 @@ grf: syscon@ff770000 { > reg = <0xf780 0x20>; > clocks = <&sdhci>; > clock-names = "emmcclk"; > - drive-impedance-ohm = <50>; > + rockchip,drive-impedance-ohm = <50>; > #phy-cells = <0>; > }; > }; > -- > 2.20.1 >
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 00aa2d349e55..3a55d8086868 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -13,14 +13,15 @@ Optional properties: access to it), it is strongly suggested. See ../clock/clock-bindings.txt for details. - clocks: Should have a phandle to the card clock exported by the SDHCI driver. - - drive-impedance-ohm: Specifies the drive impedance in Ohm. - Possible values are 33, 40, 50, 66 and 100. - If not set, the default value of 50 will be applied. - - enable-strobe-pulldown: Enable internal pull-down for the strobe line. - If not set, pull-down is not used. - - output-tapdelay-select: Specifies the phyctrl_otapdlysec register. - If not set, the register defaults to 0x4. - Maximum value 0xf. + - rockchip,drive-impedance-ohm: Specifies the drive impedance in Ohm. + Possible values are 33, 40, 50, 66 and 100. + If not set, the default value of 50 will be + applied. + - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe + line. If not set, pull-down is not used. + - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register. + If not set, the register defaults to 0x4. + Maximum value 0xf. Example: @@ -37,7 +38,7 @@ grf: syscon@ff770000 { reg = <0xf780 0x20>; clocks = <&sdhci>; clock-names = "emmcclk"; - drive-impedance-ohm = <50>; + rockchip,drive-impedance-ohm = <50>; #phy-cells = <0>; }; };
Update the documentation and add the vendor prefix to the optional properties referred in vendor-prefixes.yaml. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> --- .../bindings/phy/rockchip-emmc-phy.txt | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)