| Message ID | 20201218035338.1130849-5-andrew@aj.id.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: sdhci-of-aspeed: Expose phase delay tuning | expand |
On 18/12/20 5:53 am, Andrew Jeffery wrote: > Converting degrees of phase to logic delays is irritating to test on > hardware, so lets exercise the function using KUnit. > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > --- > drivers/mmc/host/Kconfig | 14 ++++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-of-aspeed-test.c | 100 ++++++++++++++++++++++++ > 3 files changed, 115 insertions(+) > create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 596f32637315..d6f00d1d6251 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -168,6 +168,20 @@ config MMC_SDHCI_OF_ASPEED > > If unsure, say N. > > +config MMC_SDHCI_OF_ASPEED_TEST > + bool "Tests for the ASPEED SDHCI driver" > + depends on MMC_SDHCI_OF_ASPEED && KUNIT=y > + help > + Enable KUnit tests for the ASPEED SDHCI driver. Select this > + option only if you will boot the kernel for the purpose of running > + unit tests (e.g. under UML or qemu). > + > + The KUnit tests generally exercise parts of the driver that do not > + directly touch the hardware, for example, the phase correction > + calculations. > + > + If unsure, say N. > + > config MMC_SDHCI_OF_AT91 > tristate "SDHCI OF support for the Atmel SDMMC controller" > depends on MMC_SDHCI_PLTFM > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 451c25fc2c69..3ee59d5802cf 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o > obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o > obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o > obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o > +obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST) += sdhci-of-aspeed-test.o > obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o > obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o > obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o > diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c > new file mode 100644 > index 000000000000..fb79b278fb81 > --- /dev/null > +++ b/drivers/mmc/host/sdhci-of-aspeed-test.c > @@ -0,0 +1,100 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* Copyright (C) 2020 IBM Corp. */ > + > +#include <kunit/test.h> > + > +#include "sdhci-of-aspeed.c" I am not sure including like that is advisable. Did you consider instead doing it the other way around i.e. adding an include to the bottom of sdhci-of-aspeed.c?
On Wed, 6 Jan 2021, at 00:17, Adrian Hunter wrote: > On 18/12/20 5:53 am, Andrew Jeffery wrote: > > Converting degrees of phase to logic delays is irritating to test on > > hardware, so lets exercise the function using KUnit. > > > > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > > --- > > drivers/mmc/host/Kconfig | 14 ++++ > > drivers/mmc/host/Makefile | 1 + > > drivers/mmc/host/sdhci-of-aspeed-test.c | 100 ++++++++++++++++++++++++ > > 3 files changed, 115 insertions(+) > > create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c > > > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > > index 596f32637315..d6f00d1d6251 100644 > > --- a/drivers/mmc/host/Kconfig > > +++ b/drivers/mmc/host/Kconfig > > @@ -168,6 +168,20 @@ config MMC_SDHCI_OF_ASPEED > > > > If unsure, say N. > > > > +config MMC_SDHCI_OF_ASPEED_TEST > > + bool "Tests for the ASPEED SDHCI driver" > > + depends on MMC_SDHCI_OF_ASPEED && KUNIT=y > > + help > > + Enable KUnit tests for the ASPEED SDHCI driver. Select this > > + option only if you will boot the kernel for the purpose of running > > + unit tests (e.g. under UML or qemu). > > + > > + The KUnit tests generally exercise parts of the driver that do not > > + directly touch the hardware, for example, the phase correction > > + calculations. > > + > > + If unsure, say N. > > + > > config MMC_SDHCI_OF_AT91 > > tristate "SDHCI OF support for the Atmel SDMMC controller" > > depends on MMC_SDHCI_PLTFM > > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > > index 451c25fc2c69..3ee59d5802cf 100644 > > --- a/drivers/mmc/host/Makefile > > +++ b/drivers/mmc/host/Makefile > > @@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o > > obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o > > obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o > > obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o > > +obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST) += sdhci-of-aspeed-test.o > > obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o > > obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o > > obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o > > diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c > > new file mode 100644 > > index 000000000000..fb79b278fb81 > > --- /dev/null > > +++ b/drivers/mmc/host/sdhci-of-aspeed-test.c > > @@ -0,0 +1,100 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* Copyright (C) 2020 IBM Corp. */ > > + > > +#include <kunit/test.h> > > + > > +#include "sdhci-of-aspeed.c" > > I am not sure including like that is advisable. Yeah I wasn't convinced by it either, but I was just running the tests under qemu and they did what I expected. > Did you consider instead > doing it the other way around i.e. adding an include to the bottom of > sdhci-of-aspeed.c? No, I didn't. I'll switch to this approach. Thanks! Andrew
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 596f32637315..d6f00d1d6251 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -168,6 +168,20 @@ config MMC_SDHCI_OF_ASPEED If unsure, say N. +config MMC_SDHCI_OF_ASPEED_TEST + bool "Tests for the ASPEED SDHCI driver" + depends on MMC_SDHCI_OF_ASPEED && KUNIT=y + help + Enable KUnit tests for the ASPEED SDHCI driver. Select this + option only if you will boot the kernel for the purpose of running + unit tests (e.g. under UML or qemu). + + The KUnit tests generally exercise parts of the driver that do not + directly touch the hardware, for example, the phase correction + calculations. + + If unsure, say N. + config MMC_SDHCI_OF_AT91 tristate "SDHCI OF support for the Atmel SDMMC controller" depends on MMC_SDHCI_PLTFM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 451c25fc2c69..3ee59d5802cf 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o obj-$(CONFIG_MMC_SDHCI_OF_ASPEED) += sdhci-of-aspeed.o +obj-$(CONFIG_MMC_SDHCI_OF_ASPEED_TEST) += sdhci-of-aspeed-test.o obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c new file mode 100644 index 000000000000..fb79b278fb81 --- /dev/null +++ b/drivers/mmc/host/sdhci-of-aspeed-test.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* Copyright (C) 2020 IBM Corp. */ + +#include <kunit/test.h> + +#include "sdhci-of-aspeed.c" + +static void aspeed_sdhci_phase_ddr52(struct kunit *test) +{ + int rate = 52000000; + + KUNIT_EXPECT_EQ(test, 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 0)); + KUNIT_EXPECT_EQ(test, 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 1)); + KUNIT_EXPECT_EQ(test, 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 2)); + KUNIT_EXPECT_EQ(test, 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 3)); + KUNIT_EXPECT_EQ(test, 2, + aspeed_sdhci_phase_to_tap(NULL, rate, 4)); + KUNIT_EXPECT_EQ(test, 3, + aspeed_sdhci_phase_to_tap(NULL, rate, 5)); + KUNIT_EXPECT_EQ(test, 14, + aspeed_sdhci_phase_to_tap(NULL, rate, 23)); + KUNIT_EXPECT_EQ(test, 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 24)); + KUNIT_EXPECT_EQ(test, 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 25)); + + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 180)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 181)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 182)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 183)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 2, + aspeed_sdhci_phase_to_tap(NULL, rate, 184)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 3, + aspeed_sdhci_phase_to_tap(NULL, rate, 185)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14, + aspeed_sdhci_phase_to_tap(NULL, rate, 203)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 204)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 205)); +} + +static void aspeed_sdhci_phase_hs200(struct kunit *test) +{ + int rate = 200000000; + + KUNIT_EXPECT_EQ(test, 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 0)); + KUNIT_EXPECT_EQ(test, 0, + aspeed_sdhci_phase_to_tap(NULL, rate, 5)); + KUNIT_EXPECT_EQ(test, 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 6)); + KUNIT_EXPECT_EQ(test, 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 7)); + KUNIT_EXPECT_EQ(test, 14, + aspeed_sdhci_phase_to_tap(NULL, rate, 89)); + KUNIT_EXPECT_EQ(test, 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 90)); + KUNIT_EXPECT_EQ(test, 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 91)); + KUNIT_EXPECT_EQ(test, 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 96)); + + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK, + aspeed_sdhci_phase_to_tap(NULL, rate, 180)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK, + aspeed_sdhci_phase_to_tap(NULL, rate, 185)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 186)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1, + aspeed_sdhci_phase_to_tap(NULL, rate, 187)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14, + aspeed_sdhci_phase_to_tap(NULL, rate, 269)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 270)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 271)); + KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15, + aspeed_sdhci_phase_to_tap(NULL, rate, 276)); +} + +static struct kunit_case aspeed_sdhci_test_cases[] = { + KUNIT_CASE(aspeed_sdhci_phase_ddr52), + KUNIT_CASE(aspeed_sdhci_phase_hs200), + {} +}; + +static struct kunit_suite aspeed_sdhci_test_suite = { + .name = "sdhci-of-aspeed", + .test_cases = aspeed_sdhci_test_cases, +}; +kunit_test_suite(aspeed_sdhci_test_suite);
Converting degrees of phase to logic delays is irritating to test on hardware, so lets exercise the function using KUnit. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> --- drivers/mmc/host/Kconfig | 14 ++++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-of-aspeed-test.c | 100 ++++++++++++++++++++++++ 3 files changed, 115 insertions(+) create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c