arm64: Fix labels in el2_setup macros

Commit Message

Marc Zyngier Dec. 23, 2020, 12:11 p.m. UTC

If someone happens to write the following code:

	b	1f
	init_el2_state	vhe
1:
	[...]

they will be in for a long debugging session, as the label "1f"
will be resolved *inside* the init_el2_state macro instead of
after it. Not really what one expects.

Instead, rewite the EL2 setup macros to use unambiguous labels,
thanks to the usual macro counter trick.

Signed-off-by: Marc Zyngier <[e-mail]>
---
 arch/arm64/include/asm/el2_setup.h | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Comments

Catalin Marinas Jan. 5, 2021, 12:52 p.m. UTC | #1

On Wed, Dec 23, 2020 at 12:11:31PM +0000, Marc Zyngier wrote:
> If someone happens to write the following code:
> 
> 	b	1f
> 	init_el2_state	vhe
> 1:
> 	[...]
> 
> they will be in for a long debugging session, as the label "1f"
> will be resolved *inside* the init_el2_state macro instead of
> after it. Not really what one expects.
> 
> Instead, rewite the EL2 setup macros to use unambiguous labels,
> thanks to the usual macro counter trick.
> 
> Signed-off-by: Marc Zyngier <[e-mail]>
> ---
>  arch/arm64/include/asm/el2_setup.h | 24 ++++++++++++------------

In case you need an ack:

Acked-by: Catalin Marinas <[e-mail]>

Patch

diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index a7f5a1bbc8ac..540116de80bf 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -45,24 +45,24 @@ 
 	mrs	x1, id_aa64dfr0_el1
 	sbfx	x0, x1, #ID_AA64DFR0_PMUVER_SHIFT, #4
 	cmp	x0, #1
-	b.lt	1f				// Skip if no PMU present
+	b.lt	.Lskip_pmu_\@			// Skip if no PMU present
 	mrs	x0, pmcr_el0			// Disable debug access traps
 	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
-1:
+.Lskip_pmu_\@:
 	csel	x2, xzr, x0, lt			// all PMU counters from EL1
 
 	/* Statistical profiling */
 	ubfx	x0, x1, #ID_AA64DFR0_PMSVER_SHIFT, #4
-	cbz	x0, 3f				// Skip if SPE not present
+	cbz	x0, .Lskip_spe_\@		// Skip if SPE not present
 
 .ifeqs "\mode", "nvhe"
 	mrs_s	x0, SYS_PMBIDR_EL1              // If SPE available at EL2,
 	and	x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
-	cbnz	x0, 2f				// then permit sampling of physical
+	cbnz	x0, .Lskip_spe_el2_\@		// then permit sampling of physical
 	mov	x0, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \
 		      1 << SYS_PMSCR_EL2_PA_SHIFT)
 	msr_s	SYS_PMSCR_EL2, x0		// addresses and physical counter
-2:
+.Lskip_spe_el2_\@:
 	mov	x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
 	orr	x2, x2, x0			// If we don't have VHE, then
 						// use EL1&0 translation.
@@ -71,7 +71,7 @@ 
 						// and disable access from EL1
 .endif
 
-3:
+.Lskip_spe_\@:
 	msr	mdcr_el2, x2			// Configure debug traps
 .endm
 
@@ -79,9 +79,9 @@ 
 .macro __init_el2_lor
 	mrs	x1, id_aa64mmfr1_el1
 	ubfx	x0, x1, #ID_AA64MMFR1_LOR_SHIFT, 4
-	cbz	x0, 1f
+	cbz	x0, .Lskip_lor_\@
 	msr_s	SYS_LORC_EL1, xzr
-1:
+.Lskip_lor_\@:
 .endm
 
 /* Stage-2 translation */
@@ -93,7 +93,7 @@ 
 .macro __init_el2_gicv3
 	mrs	x0, id_aa64pfr0_el1
 	ubfx	x0, x0, #ID_AA64PFR0_GIC_SHIFT, #4
-	cbz	x0, 1f
+	cbz	x0, .Lskip_gicv3_\@
 
 	mrs_s	x0, SYS_ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
@@ -103,7 +103,7 @@ 
 	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
 	tbz	x0, #0, 1f			// and check that it sticks
 	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
-1:
+.Lskip_gicv3_\@:
 .endm
 
 .macro __init_el2_hstr
@@ -128,14 +128,14 @@ 
 .macro __init_el2_nvhe_sve
 	mrs	x1, id_aa64pfr0_el1
 	ubfx	x1, x1, #ID_AA64PFR0_SVE_SHIFT, #4
-	cbz	x1, 1f
+	cbz	x1, .Lskip_sve_\@
 
 	bic	x0, x0, #CPTR_EL2_TZ		// Also disable SVE traps
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
 	isb
 	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
 	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
-1:
+.Lskip_sve_\@:
 .endm
 
 .macro __init_el2_nvhe_prepare_eret