| Message ID | 20210115101613.1490837-1-paweldembicki@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] arm64: dts: fsl-ls1012a-rdb: add i2c devices | expand |
On Fri, Jan 15, 2021 at 11:16:12AM +0100, Pawel Dembicki wrote: > LS1012A-RDB equipped in some i2c devices: > - 3x GPIO Expander: PCAL9555A (NXP) > - Gyro: FXAS21002 (NXP) > - Accelerometer: FXOS8700 (NXP) > - Current & Power Monitor: INA220 (TI) > > This patch add listed devices to dts. > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> > --- > .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > index d45c17620b98..12117a973eb6 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > @@ -7,6 +7,7 @@ > */ > /dts-v1/; > > +#include <dt-bindings/interrupt-controller/irq.h> > #include "fsl-ls1012a.dtsi" > > / { > @@ -33,6 +34,50 @@ &esdhc1 { > > &i2c0 { > status = "okay"; > + > + accelerometer@1e { > + compatible = "nxp,fxos8700"; > + reg = <0x1e>; > + interrupt-parent = <&gpio26>; > + interrupts = <13 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "INT1"; > + }; > + > + gyroscope@20 { Please sort these device node in unit-address. Shawn > + compatible = "nxp,fxas21002c"; > + reg = <0x20>; > + }; > + > + gpio@24 { > + compatible = "nxp,pcal9555a"; > + reg = <0x24>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + gpio@25 { > + compatible = "nxp,pcal9555a"; > + reg = <0x25>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + gpio26: gpio@26 { > + compatible = "nxp,pcal9555a"; > + reg = <0x26>; > + interrupt-parent = <&gpio0>; > + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + current-sensor@40 { > + compatible = "ti,ina220"; > + reg = <0x40>; > + shunt-resistor = <2000>; > + }; > }; > > &qspi { > -- > 2.25.1 >
On 18.01.2021 at 08:36 Shawn Guo <shawnguo@kernel.org> wrote: > > On Fri, Jan 15, 2021 at 11:16:12AM +0100, Pawel Dembicki wrote: > > LS1012A-RDB equipped in some i2c devices: > > - 3x GPIO Expander: PCAL9555A (NXP) > > - Gyro: FXAS21002 (NXP) > > - Accelerometer: FXOS8700 (NXP) > > - Current & Power Monitor: INA220 (TI) > > > > This patch add listed devices to dts. > > > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> > > --- > > .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 45 +++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > index d45c17620b98..12117a973eb6 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > @@ -7,6 +7,7 @@ > > */ > > /dts-v1/; > > > > +#include <dt-bindings/interrupt-controller/irq.h> > > #include "fsl-ls1012a.dtsi" > > > > / { > > @@ -33,6 +34,50 @@ &esdhc1 { > > > > &i2c0 { > > status = "okay"; > > + > > + accelerometer@1e { > > + compatible = "nxp,fxos8700"; > > + reg = <0x1e>; > > + interrupt-parent = <&gpio26>; > > + interrupts = <13 IRQ_TYPE_EDGE_RISING>; > > + interrupt-names = "INT1"; > > + }; > > + > > + gyroscope@20 { > > Please sort these device node in unit-address. > > Shawn > Could You give me more details please? Devices are sorted by unit-address ascending. Pawel > > + compatible = "nxp,fxas21002c"; > > + reg = <0x20>; > > + }; > > + > > + gpio@24 { > > + compatible = "nxp,pcal9555a"; > > + reg = <0x24>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + gpio@25 { > > + compatible = "nxp,pcal9555a"; > > + reg = <0x25>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + gpio26: gpio@26 { > > + compatible = "nxp,pcal9555a"; > > + reg = <0x26>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + current-sensor@40 { > > + compatible = "ti,ina220"; > > + reg = <0x40>; > > + shunt-resistor = <2000>; > > + }; > > }; > > > > &qspi { > > -- > > 2.25.1 > >
On Mon, Jan 18, 2021 at 11:08:11AM +0100, Paweł Dembicki wrote: > On 18.01.2021 at 08:36 Shawn Guo <shawnguo@kernel.org> wrote: > > > > On Fri, Jan 15, 2021 at 11:16:12AM +0100, Pawel Dembicki wrote: > > > LS1012A-RDB equipped in some i2c devices: > > > - 3x GPIO Expander: PCAL9555A (NXP) > > > - Gyro: FXAS21002 (NXP) > > > - Accelerometer: FXOS8700 (NXP) > > > - Current & Power Monitor: INA220 (TI) > > > > > > This patch add listed devices to dts. > > > > > > Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> > > > --- > > > .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 45 +++++++++++++++++++ > > > 1 file changed, 45 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > > index d45c17620b98..12117a973eb6 100644 > > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts > > > @@ -7,6 +7,7 @@ > > > */ > > > /dts-v1/; > > > > > > +#include <dt-bindings/interrupt-controller/irq.h> > > > #include "fsl-ls1012a.dtsi" > > > > > > / { > > > @@ -33,6 +34,50 @@ &esdhc1 { > > > > > > &i2c0 { > > > status = "okay"; > > > + > > > + accelerometer@1e { > > > + compatible = "nxp,fxos8700"; > > > + reg = <0x1e>; > > > + interrupt-parent = <&gpio26>; > > > + interrupts = <13 IRQ_TYPE_EDGE_RISING>; > > > + interrupt-names = "INT1"; > > > + }; > > > + > > > + gyroscope@20 { > > > > Please sort these device node in unit-address. > > > > Shawn > > > > Could You give me more details please? Devices are sorted by > unit-address ascending. Oops! I'm sorry. It must be something went wrong with my eyes. Shawn
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index d45c17620b98..12117a973eb6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { @@ -33,6 +34,50 @@ &esdhc1 { &i2c0 { status = "okay"; + + accelerometer@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + interrupt-parent = <&gpio26>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + gpio@24 { + compatible = "nxp,pcal9555a"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@25 { + compatible = "nxp,pcal9555a"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio26: gpio@26 { + compatible = "nxp,pcal9555a"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <2000>; + }; }; &qspi {
LS1012A-RDB equipped in some i2c devices: - 3x GPIO Expander: PCAL9555A (NXP) - Gyro: FXAS21002 (NXP) - Accelerometer: FXOS8700 (NXP) - Current & Power Monitor: INA220 (TI) This patch add listed devices to dts. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> --- .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+)