diff mbox series

[3/6] arm64: dts: hisilicon: normalize the node name of the module thermal

Message ID 20210118031634.934-4-thunder.leizhen@huawei.com (mailing list archive)
State New, archived
Headers show
Series further clean up Hisilicon-related errors detected by DT schema on arm64 | expand

Commit Message

Zhen Lei Jan. 18, 2021, 3:16 a.m. UTC 
1. Change the node name of the thermal zone to match
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', add suffix "-thermal".
2. Change the node name of the trip point to match
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', delete character "@".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 6 +++---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index bfb1375426d2b58..8b8d3d07b67fe84 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1113,7 +1113,7 @@ 
 
 		thermal-zones {
 
-			cls0: cls0 {
+			cls0: cls0-thermal {
 				polling-delay = <1000>;
 				polling-delay-passive = <100>;
 				sustainable-power = <4500>;
@@ -1122,13 +1122,13 @@ 
 				thermal-sensors = <&tsensor 1>;
 
 				trips {
-					threshold: trip-point@0 {
+					threshold: trip-point0 {
 						temperature = <65000>;
 						hysteresis = <1000>;
 						type = "passive";
 					};
 
-					target: trip-point@1 {
+					target: trip-point1 {
 						temperature = <75000>;
 						hysteresis = <1000>;
 						type = "passive";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index f9953303a3f44dc..d426c6c8722b307 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -872,7 +872,7 @@ 
 
 		thermal-zones {
 
-			cls0: cls0 {
+			cls0: cls0-thermal {
 				polling-delay = <1000>;
 				polling-delay-passive = <100>;
 				sustainable-power = <3326>;
@@ -881,13 +881,13 @@ 
 				thermal-sensors = <&tsensor 2>;
 
 				trips {
-					threshold: trip-point@0 {
+					threshold: trip-point0 {
 						temperature = <65000>;
 						hysteresis = <0>;
 						type = "passive";
 					};
 
-					target: trip-point@1 {
+					target: trip-point1 {
 						temperature = <75000>;
 						hysteresis = <0>;
 						type = "passive";