diff mbox series

[PATCH/RFC] soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init

Message ID 20210120142323.2203705-1-geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series [PATCH/RFC] soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init | expand

Commit Message

Geert Uytterhoeven Jan. 20, 2021, 2:23 p.m. UTC
The R-Car System Controller (SYSC) driver registers PM domains from an
early_initcall().  It does not use a platform driver, as secondary CPU
startup on R-Car H1 needs to control the CPU power domains, before
initialization of the driver framework.

As fw_devlink only considers platform devices, it does not know that the
System Controller is ready.  Hence probing of on-chip devices that are
part of the SYSC PM domain fail:

    probe deferral - supplier e6180000.system-controller not ready

Fix this by setting the OF_POPULATED flag for the SYSC device node after
successful initialization.  This will make of_link_to_phandle() ignore
the SYSC device node as a dependency, and consumer devices will be
probed again.

Fixes: e590474768f1cc04 ("driver core: Set fw_devlink=on by default")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/soc/renesas/rcar-sysc.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Saravana Kannan Jan. 20, 2021, 5:09 p.m. UTC | #1
On Wed, Jan 20, 2021 at 6:23 AM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
>
> The R-Car System Controller (SYSC) driver registers PM domains from an
> early_initcall().  It does not use a platform driver, as secondary CPU
> startup on R-Car H1 needs to control the CPU power domains, before
> initialization of the driver framework.
>
> As fw_devlink only considers platform devices,

Correction. It only considers devices. As in, devices on all types of
busses are supported.

> it does not know that the
> System Controller is ready.  Hence probing of on-chip devices that are
> part of the SYSC PM domain fail:
>
>     probe deferral - supplier e6180000.system-controller not ready
>
> Fix this by setting the OF_POPULATED flag for the SYSC device node after
> successful initialization.  This will make of_link_to_phandle() ignore
> the SYSC device node as a dependency, and consumer devices will be
> probed again.

It'd still be nice if you could (maybe in a later patch), at least
probe all the power domains that aren't really needed this early.
Using the driver core framework (when it's possible), gives you nice
things :)

+Rob. I know he hates people using OF_POPULATED, but I think this case
is reasonable and want to make sure he's aware of this.

Once you fix my commit nitpick, you can add:
Reviewed-by: Saravana Kannan <saravanak@google.com>

-Saravana

>
> Fixes: e590474768f1cc04 ("driver core: Set fw_devlink=on by default")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  drivers/soc/renesas/rcar-sysc.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
> index 9b235fc900273405..a00bb098e1fe7488 100644
> --- a/drivers/soc/renesas/rcar-sysc.c
> +++ b/drivers/soc/renesas/rcar-sysc.c
> @@ -439,6 +439,8 @@ static int __init rcar_sysc_pd_init(void)
>         }
>
>         error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
> +       if (!error)
> +               of_node_set_flag(np, OF_POPULATED);
>
>  out_put:
>         of_node_put(np);
> --
> 2.25.1
>
Geert Uytterhoeven Jan. 21, 2021, 3:38 p.m. UTC | #2
Hi Saravana,

On Wed, Jan 20, 2021 at 6:09 PM Saravana Kannan <saravanak@google.com> wrote:
> On Wed, Jan 20, 2021 at 6:23 AM Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
> > The R-Car System Controller (SYSC) driver registers PM domains from an
> > early_initcall().  It does not use a platform driver, as secondary CPU
> > startup on R-Car H1 needs to control the CPU power domains, before
> > initialization of the driver framework.
> >
> > As fw_devlink only considers platform devices,
>
> Correction. It only considers devices. As in, devices on all types of
> busses are supported.

OK.

> > it does not know that the
> > System Controller is ready.  Hence probing of on-chip devices that are
> > part of the SYSC PM domain fail:
> >
> >     probe deferral - supplier e6180000.system-controller not ready
> >
> > Fix this by setting the OF_POPULATED flag for the SYSC device node after
> > successful initialization.  This will make of_link_to_phandle() ignore
> > the SYSC device node as a dependency, and consumer devices will be
> > probed again.
>
> It'd still be nice if you could (maybe in a later patch), at least
> probe all the power domains that aren't really needed this early.
> Using the driver core framework (when it's possible), gives you nice
> things :)

Which nice things are you thinking of? Making the driver modular?
At least on R-Car H1, it needs to be built-in for SMP to work.

> +Rob. I know he hates people using OF_POPULATED, but I think this case
> is reasonable and want to make sure he's aware of this.
>
> Once you fix my commit nitpick, you can add:
> Reviewed-by: Saravana Kannan <saravanak@google.com>

Thanks!

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 9b235fc900273405..a00bb098e1fe7488 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -439,6 +439,8 @@  static int __init rcar_sysc_pd_init(void)
 	}
 
 	error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
+	if (!error)
+		of_node_set_flag(np, OF_POPULATED);
 
 out_put:
 	of_node_put(np);