| Message ID | 20210120162400.4115366-2-arnd@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | thermal: remove obsolete drivers | expand |
Arnd Bergmann <arnd@kernel.org> writes: > From: Arnd Bergmann <arnd@arndb.de> > > The tango platform is getting removed, so the driver is no > longer needed. > > Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> > Cc: Mans Rullgard <mans@mansr.com> > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> > --- > .../bindings/thermal/tango-thermal.txt | 17 --- > drivers/thermal/Kconfig | 9 -- > drivers/thermal/Makefile | 1 - > drivers/thermal/tango_thermal.c | 126 ------------------ > 4 files changed, 153 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/thermal/tango-thermal.txt > delete mode 100644 drivers/thermal/tango_thermal.c > > diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt > deleted file mode 100644 > index 2c918d742867..000000000000 > --- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt > +++ /dev/null > @@ -1,17 +0,0 @@ > -* Tango Thermal > - > -The SMP8758 SoC includes 3 instances of this temperature sensor > -(in the CPU, video decoder, and PCIe controller). > - > -Required properties: > -- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) > > -- compatible: "sigma,smp8758-thermal" > -- reg: Address range of the thermal registers > - > -Example: > - > - cpu_temp: thermal@920100 { > - #thermal-sensor-cells = <0>; > - compatible = "sigma,smp8758-thermal"; > - reg = <0x920100 12>; > - }; > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 7edc8dc6bbab..cf199574c096 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF > source "drivers/thermal/st/Kconfig" > endmenu > > -config TANGO_THERMAL > - tristate "Tango thermal management" > - depends on ARCH_TANGO || COMPILE_TEST > - help > - Enable the Tango thermal driver, which supports the primitive > - temperature sensor embedded in Tango chips since the SMP8758. > - This sensor only generates a 1-bit signal to indicate whether > - the die temperature exceeds a programmable threshold. > - > source "drivers/thermal/tegra/Kconfig" > > config GENERIC_ADC_THERMAL > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index b64dd50a6629..a44dda2d03bc 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -42,7 +42,6 @@ obj-y += samsung/ > obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o > obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > -obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o > obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o > diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c > deleted file mode 100644 > index 304b461e12aa..000000000000 > --- a/drivers/thermal/tango_thermal.c > +++ /dev/null > @@ -1,126 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -#include <linux/io.h> > -#include <linux/delay.h> > -#include <linux/module.h> > -#include <linux/thermal.h> > -#include <linux/platform_device.h> > - > -/* > - * According to a data sheet draft, "this temperature sensor uses a bandgap > - * type of circuit to compare a voltage which has a negative temperature > - * coefficient with a voltage that is proportional to absolute temperature. > - * A resistor bank allows 41 different temperature thresholds to be selected > - * and the logic output will then indicate whether the actual die temperature > - * lies above or below the selected threshold." > - */ > - > -#define TEMPSI_CMD 0 > -#define TEMPSI_RES 4 > -#define TEMPSI_CFG 8 > - > -#define CMD_OFF 0 > -#define CMD_ON 1 > -#define CMD_READ 2 > - > -#define IDX_MIN 15 > -#define IDX_MAX 40 > - > -struct tango_thermal_priv { > - void __iomem *base; > - int thresh_idx; > -}; > - > -static bool temp_above_thresh(void __iomem *base, int thresh_idx) > -{ > - writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); > - usleep_range(10, 20); > - writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); > - > - return readl(base + TEMPSI_RES); > -} > - > -static int tango_get_temp(void *arg, int *res) > -{ > - struct tango_thermal_priv *priv = arg; > - int idx = priv->thresh_idx; > - > - if (temp_above_thresh(priv->base, idx)) { > - /* Search upward by incrementing thresh_idx */ > - while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx)) > - cpu_relax(); > - idx = idx - 1; /* always return lower bound */ > - } else { > - /* Search downward by decrementing thresh_idx */ > - while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx)) > - cpu_relax(); > - } > - > - *res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */ > - priv->thresh_idx = idx; > - > - return 0; > -} > - > -static const struct thermal_zone_of_device_ops ops = { > - .get_temp = tango_get_temp, > -}; > - > -static void tango_thermal_init(struct tango_thermal_priv *priv) > -{ > - writel(0, priv->base + TEMPSI_CFG); > - writel(CMD_ON, priv->base + TEMPSI_CMD); > -} > - > -static int tango_thermal_probe(struct platform_device *pdev) > -{ > - struct resource *res; > - struct tango_thermal_priv *priv; > - struct thermal_zone_device *tzdev; > - > - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > - if (!priv) > - return -ENOMEM; > - > - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - priv->base = devm_ioremap_resource(&pdev->dev, res); > - if (IS_ERR(priv->base)) > - return PTR_ERR(priv->base); > - > - platform_set_drvdata(pdev, priv); > - priv->thresh_idx = IDX_MIN; > - tango_thermal_init(priv); > - > - tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops); > - return PTR_ERR_OR_ZERO(tzdev); > -} > - > -static int __maybe_unused tango_thermal_resume(struct device *dev) > -{ > - tango_thermal_init(dev_get_drvdata(dev)); > - return 0; > -} > - > -static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume); > - > -static const struct of_device_id tango_sensor_ids[] = { > - { > - .compatible = "sigma,smp8758-thermal", > - }, > - { /* sentinel */ } > -}; > -MODULE_DEVICE_TABLE(of, tango_sensor_ids); > - > -static struct platform_driver tango_thermal_driver = { > - .probe = tango_thermal_probe, > - .driver = { > - .name = "tango-thermal", > - .of_match_table = tango_sensor_ids, > - .pm = &tango_thermal_pm, > - }, > -}; > - > -module_platform_driver(tango_thermal_driver); > - > -MODULE_LICENSE("GPL"); > -MODULE_AUTHOR("Sigma Designs"); > -MODULE_DESCRIPTION("Tango temperature sensor"); > -- > > 2.29.2 >
diff --git a/Documentation/devicetree/bindings/thermal/tango-thermal.txt b/Documentation/devicetree/bindings/thermal/tango-thermal.txt deleted file mode 100644 index 2c918d742867..000000000000 --- a/Documentation/devicetree/bindings/thermal/tango-thermal.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Tango Thermal - -The SMP8758 SoC includes 3 instances of this temperature sensor -(in the CPU, video decoder, and PCIe controller). - -Required properties: -- #thermal-sensor-cells: Should be 0 (see Documentation/devicetree/bindings/thermal/thermal-sensor.yaml) -- compatible: "sigma,smp8758-thermal" -- reg: Address range of the thermal registers - -Example: - - cpu_temp: thermal@920100 { - #thermal-sensor-cells = <0>; - compatible = "sigma,smp8758-thermal"; - reg = <0x920100 12>; - }; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 7edc8dc6bbab..cf199574c096 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -450,15 +450,6 @@ depends on (ARCH_STI || ARCH_STM32) && OF source "drivers/thermal/st/Kconfig" endmenu -config TANGO_THERMAL - tristate "Tango thermal management" - depends on ARCH_TANGO || COMPILE_TEST - help - Enable the Tango thermal driver, which supports the primitive - temperature sensor embedded in Tango chips since the SMP8758. - This sensor only generates a 1-bit signal to indicate whether - the die temperature exceeds a programmable threshold. - source "drivers/thermal/tegra/Kconfig" config GENERIC_ADC_THERMAL diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index b64dd50a6629..a44dda2d03bc 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -42,7 +42,6 @@ obj-y += samsung/ obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o -obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c deleted file mode 100644 index 304b461e12aa..000000000000 --- a/drivers/thermal/tango_thermal.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/thermal.h> -#include <linux/platform_device.h> - -/* - * According to a data sheet draft, "this temperature sensor uses a bandgap - * type of circuit to compare a voltage which has a negative temperature - * coefficient with a voltage that is proportional to absolute temperature. - * A resistor bank allows 41 different temperature thresholds to be selected - * and the logic output will then indicate whether the actual die temperature - * lies above or below the selected threshold." - */ - -#define TEMPSI_CMD 0 -#define TEMPSI_RES 4 -#define TEMPSI_CFG 8 - -#define CMD_OFF 0 -#define CMD_ON 1 -#define CMD_READ 2 - -#define IDX_MIN 15 -#define IDX_MAX 40 - -struct tango_thermal_priv { - void __iomem *base; - int thresh_idx; -}; - -static bool temp_above_thresh(void __iomem *base, int thresh_idx) -{ - writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); - usleep_range(10, 20); - writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD); - - return readl(base + TEMPSI_RES); -} - -static int tango_get_temp(void *arg, int *res) -{ - struct tango_thermal_priv *priv = arg; - int idx = priv->thresh_idx; - - if (temp_above_thresh(priv->base, idx)) { - /* Search upward by incrementing thresh_idx */ - while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx)) - cpu_relax(); - idx = idx - 1; /* always return lower bound */ - } else { - /* Search downward by decrementing thresh_idx */ - while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx)) - cpu_relax(); - } - - *res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */ - priv->thresh_idx = idx; - - return 0; -} - -static const struct thermal_zone_of_device_ops ops = { - .get_temp = tango_get_temp, -}; - -static void tango_thermal_init(struct tango_thermal_priv *priv) -{ - writel(0, priv->base + TEMPSI_CFG); - writel(CMD_ON, priv->base + TEMPSI_CMD); -} - -static int tango_thermal_probe(struct platform_device *pdev) -{ - struct resource *res; - struct tango_thermal_priv *priv; - struct thermal_zone_device *tzdev; - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(priv->base)) - return PTR_ERR(priv->base); - - platform_set_drvdata(pdev, priv); - priv->thresh_idx = IDX_MIN; - tango_thermal_init(priv); - - tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops); - return PTR_ERR_OR_ZERO(tzdev); -} - -static int __maybe_unused tango_thermal_resume(struct device *dev) -{ - tango_thermal_init(dev_get_drvdata(dev)); - return 0; -} - -static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume); - -static const struct of_device_id tango_sensor_ids[] = { - { - .compatible = "sigma,smp8758-thermal", - }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, tango_sensor_ids); - -static struct platform_driver tango_thermal_driver = { - .probe = tango_thermal_probe, - .driver = { - .name = "tango-thermal", - .of_match_table = tango_sensor_ids, - .pm = &tango_thermal_pm, - }, -}; - -module_platform_driver(tango_thermal_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sigma Designs"); -MODULE_DESCRIPTION("Tango temperature sensor");