diff mbox series

[v2,14/24] net: stmmac: Use optional clock request method to get stmmaceth

Message ID 20210208135609.7685-15-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State New, archived
Headers show
Series net: stmmac: Fix clocks/reset-related procedures | expand

Commit Message

Serge Semin Feb. 8, 2021, 1:55 p.m. UTC
The "stmmaceth" clock is expected to be optional by the current driver
design, but there are several problems in the implementation. First if the
clock is specified, but failed to be requested due to an internal error or
due to not being ready yet for configuration, then the DT-probe procedure
will just proceed with further initializations. It is erroneous in both
cases. Secondly if we'd use the clock API, which expect the clock being
optional we wouldn't have needed to avoid the clock request procedure for
the "snps,dwc-qos-ethernet-4.10"-compatible devices to prevent the error
message from being printed. All of that can be fixed by using the
devm_clk_get_optional() method here provided by the common clock
framework.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index ff66c470f07f..a66467baf30a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -566,16 +566,17 @@  stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	if (rc)
 		goto error_dma_cfg_alloc;
 
-	/* clock setup */
-	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
-		plat->stmmac_clk = devm_clk_get(&pdev->dev,
-						STMMAC_RESOURCE_NAME);
-		if (IS_ERR(plat->stmmac_clk)) {
-			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
-			plat->stmmac_clk = NULL;
-		}
-		clk_prepare_enable(plat->stmmac_clk);
+	/* All clocks are optional since the sub-drivers may use the platform
+	 * clocks pointers to preserve their own clock-descriptors.
+	 */
+	plat->stmmac_clk = devm_clk_get_optional(&pdev->dev,
+						 STMMAC_RESOURCE_NAME);
+	if (IS_ERR(plat->stmmac_clk)) {
+		rc = PTR_ERR(plat->stmmac_clk);
+		dev_err_probe(&pdev->dev, rc, "Cannot get CSR clock\n");
+		goto error_dma_cfg_alloc;
 	}
+	clk_prepare_enable(plat->stmmac_clk);
 
 	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
 	if (IS_ERR(plat->pclk)) {