| Message ID | 20210209005259.29725-1-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ls1028a: add interrupt to Root Complex Event Collector | expand |
On Tue, Feb 09, 2021 at 01:52:59AM +0100, Michael Walle wrote: > The legacy interrupt INT_A is hardwired to the event collector. RCEC is > bascially supported starting with v5.11. Having a correct interrupt, will > make RCEC at least probe correctly. > > There are still issues with how RCEC is implemented in the RCiEP on the > LS1028A. RCEC will report an error, but it cannot find the correct > subdevice. > > Signed-off-by: Michael Walle <michael@walle.cc> > --- Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Hi, Am 2021-02-09 01:52, schrieb Michael Walle: > The legacy interrupt INT_A is hardwired to the event collector. RCEC is > bascially supported starting with v5.11. Having a correct interrupt, > will > make RCEC at least probe correctly. > > There are still issues with how RCEC is implemented in the RCiEP on the > LS1028A. RCEC will report an error, but it cannot find the correct > subdevice. > > Signed-off-by: Michael Walle <michael@walle.cc> Any news on this? -michael
On Tue, Feb 09, 2021 at 01:52:59AM +0100, Michael Walle wrote: > The legacy interrupt INT_A is hardwired to the event collector. RCEC is > bascially supported starting with v5.11. Having a correct interrupt, will > make RCEC at least probe correctly. > > There are still issues with how RCEC is implemented in the RCiEP on the > LS1028A. RCEC will report an error, but it cannot find the correct > subdevice. > > Signed-off-by: Michael Walle <michael@walle.cc> > --- > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > index 262fbad8f0ec..c1f2f402ad53 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > @@ -1114,6 +1114,12 @@ > full-duplex; > }; > }; > + > + rcec@1f,0 { Just curious how unit-address comes to '1f,0'? Shawn > + reg = <0x00f800 0 0 0 0>; > + /* IEP INT_A */ > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > + }; > }; > > rcpm: power-controller@1e34040 { > -- > 2.20.1 >
Am 2021-03-04 12:37, schrieb Shawn Guo: > On Tue, Feb 09, 2021 at 01:52:59AM +0100, Michael Walle wrote: >> The legacy interrupt INT_A is hardwired to the event collector. RCEC >> is >> bascially supported starting with v5.11. Having a correct interrupt, >> will >> make RCEC at least probe correctly. >> >> There are still issues with how RCEC is implemented in the RCiEP on >> the >> LS1028A. RCEC will report an error, but it cannot find the correct >> subdevice. >> >> Signed-off-by: Michael Walle <michael@walle.cc> >> --- >> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> index 262fbad8f0ec..c1f2f402ad53 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> @@ -1114,6 +1114,12 @@ >> full-duplex; >> }; >> }; >> + >> + rcec@1f,0 { > > Just curious how unit-address comes to '1f,0'? You mean that it's pci dev 1f func 0? 0x00f800 >> 11 == 0x1f See also: https://elixir.bootlin.com/linux/v5.12-rc1/source/scripts/dtc/checks.c#L916 -michael > > Shawn > >> + reg = <0x00f800 0 0 0 0>; >> + /* IEP INT_A */ >> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> }; >> >> rcpm: power-controller@1e34040 { >> -- >> 2.20.1 >>
On Tue, Feb 09, 2021 at 01:52:59AM +0100, Michael Walle wrote: > The legacy interrupt INT_A is hardwired to the event collector. RCEC is > bascially supported starting with v5.11. Having a correct interrupt, will > make RCEC at least probe correctly. > > There are still issues with how RCEC is implemented in the RCiEP on the > LS1028A. RCEC will report an error, but it cannot find the correct > subdevice. > > Signed-off-by: Michael Walle <michael@walle.cc> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 262fbad8f0ec..c1f2f402ad53 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1114,6 +1114,12 @@ full-duplex; }; }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; }; rcpm: power-controller@1e34040 {
The legacy interrupt INT_A is hardwired to the event collector. RCEC is bascially supported starting with v5.11. Having a correct interrupt, will make RCEC at least probe correctly. There are still issues with how RCEC is implemented in the RCiEP on the LS1028A. RCEC will report an error, but it cannot find the correct subdevice. Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)