diff mbox series

[v3,3/6] ARM: dts: imx6dl-prtvt7: Add display and panel nodes

Message ID 20210209095121.28098-4-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series devicetree fixes for Protonic and Plymovent boards | expand

Commit Message

Oleksij Rempel Feb. 9, 2021, 9:51 a.m. UTC 
Add Innolux G070Y2-T02 panel to the Protonic VT7 board.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 47 +++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index ae6da241f13e..d9cb1e41cc10 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -31,6 +31,30 @@  backlight_lcd: backlight-lcd {
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -138,6 +162,18 @@  led-debug0 {
 		};
 	};
 
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
 	reg_bl_12v0: regulator-bl-12v0 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -149,6 +185,13 @@  reg_bl_12v0: regulator-bl-12v0 {
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1v8";
@@ -260,6 +303,10 @@  &ipu1 {
 	status = "okay";
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
 &pwm1 {
 	#pwm-cells = <2>;
 	pinctrl-names = "default";