diff mbox series

[v13,2/7] kasan: Add KASAN mode kernel parameter

Message ID 20210211153353.29094-3-vincenzo.frascino@arm.com (mailing list archive)
State New, archived
Headers show
Series arm64: ARMv8.5-A: MTE: Add async mode support | expand

Commit Message

Vincenzo Frascino Feb. 11, 2021, 3:33 p.m. UTC
Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.

KASAN requires a specific kernel command line parameter to make use of this
hw features.

Add KASAN HW execution mode kernel command line parameter.

Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.

Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[ Add a new var instead of exposing kasan_arg_mode to be consistent with
  flags for other command line arguments. ]
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
---
 Documentation/dev-tools/kasan.rst |  9 ++++++
 lib/test_kasan.c                  |  2 +-
 mm/kasan/hw_tags.c                | 52 ++++++++++++++++++++++++++++++-
 mm/kasan/kasan.h                  |  7 +++--
 4 files changed, 66 insertions(+), 4 deletions(-)

Comments

Andrey Konovalov Feb. 11, 2021, 5:50 p.m. UTC | #1
On Thu, Feb 11, 2021 at 4:34 PM Vincenzo Frascino
<vincenzo.frascino@arm.com> wrote:
>
> Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
> of execution. On an MTE enabled arm64 hw for example this can be identified
> with the synchronous or asynchronous tagging mode of execution.
> In synchronous mode, an exception is triggered if a tag check fault occurs.
> In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
> updated asynchronously. The kernel checks the corresponding bits
> periodically.
>
> KASAN requires a specific kernel command line parameter to make use of this
> hw features.
>
> Add KASAN HW execution mode kernel command line parameter.
>
> Note: This patch adds the kasan.mode kernel parameter and the
> sync/async kernel command line options to enable the described features.
>
> Cc: Dmitry Vyukov <dvyukov@google.com>
> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
> Cc: Alexander Potapenko <glider@google.com>
> Cc: Andrey Konovalov <andreyknvl@google.com>
> Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
> [ Add a new var instead of exposing kasan_arg_mode to be consistent with
>   flags for other command line arguments. ]
> Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
> ---
>  Documentation/dev-tools/kasan.rst |  9 ++++++
>  lib/test_kasan.c                  |  2 +-
>  mm/kasan/hw_tags.c                | 52 ++++++++++++++++++++++++++++++-
>  mm/kasan/kasan.h                  |  7 +++--
>  4 files changed, 66 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
> index ddf4239a5890..6f6ab3ed7b79 100644
> --- a/Documentation/dev-tools/kasan.rst
> +++ b/Documentation/dev-tools/kasan.rst
> @@ -161,6 +161,15 @@ particular KASAN features.
>
>  - ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``).
>
> +- ``kasan.mode=sync`` or ``=async`` controls whether KASAN is configured in
> +  synchronous or asynchronous mode of execution (default: ``sync``).
> +  Synchronous mode: a bad access is detected immediately when a tag
> +  check fault occurs.
> +  Asynchronous mode: a bad access detection is delayed. When a tag check
> +  fault occurs, the information is stored in hardware (in the TFSR_EL1
> +  register for arm64). The kernel periodically checks the hardware and
> +  only reports tag faults during these checks.
> +
>  - ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
>    traces collection (default: ``on``).
>
> diff --git a/lib/test_kasan.c b/lib/test_kasan.c
> index 1328c468fdb5..f8c72d3aed64 100644
> --- a/lib/test_kasan.c
> +++ b/lib/test_kasan.c
> @@ -97,7 +97,7 @@ static void kasan_test_exit(struct kunit *test)
>                         READ_ONCE(fail_data.report_found));     \
>         if (IS_ENABLED(CONFIG_KASAN_HW_TAGS)) {                 \
>                 if (READ_ONCE(fail_data.report_found))          \
> -                       hw_enable_tagging();                    \
> +                       hw_enable_tagging_sync();               \
>                 migrate_enable();                               \
>         }                                                       \
>  } while (0)
> diff --git a/mm/kasan/hw_tags.c b/mm/kasan/hw_tags.c
> index 1dfe4f62a89e..bd249d1f6cdc 100644
> --- a/mm/kasan/hw_tags.c
> +++ b/mm/kasan/hw_tags.c
> @@ -25,6 +25,12 @@ enum kasan_arg {
>         KASAN_ARG_ON,
>  };
>
> +enum kasan_arg_mode {
> +       KASAN_ARG_MODE_DEFAULT,
> +       KASAN_ARG_MODE_SYNC,
> +       KASAN_ARG_MODE_ASYNC,
> +};
> +
>  enum kasan_arg_stacktrace {
>         KASAN_ARG_STACKTRACE_DEFAULT,
>         KASAN_ARG_STACKTRACE_OFF,
> @@ -38,6 +44,7 @@ enum kasan_arg_fault {
>  };
>
>  static enum kasan_arg kasan_arg __ro_after_init;
> +static enum kasan_arg_mode kasan_arg_mode __ro_after_init;
>  static enum kasan_arg_stacktrace kasan_arg_stacktrace __ro_after_init;
>  static enum kasan_arg_fault kasan_arg_fault __ro_after_init;
>
> @@ -45,6 +52,10 @@ static enum kasan_arg_fault kasan_arg_fault __ro_after_init;
>  DEFINE_STATIC_KEY_FALSE(kasan_flag_enabled);
>  EXPORT_SYMBOL(kasan_flag_enabled);
>
> +/* Whether the asynchronous mode is enabled. */
> +bool kasan_flag_async __ro_after_init;
> +EXPORT_SYMBOL_GPL(kasan_flag_async);
> +
>  /* Whether to collect alloc/free stack traces. */
>  DEFINE_STATIC_KEY_FALSE(kasan_flag_stacktrace);
>
> @@ -68,6 +79,21 @@ static int __init early_kasan_flag(char *arg)
>  }
>  early_param("kasan", early_kasan_flag);
>
> +/* kasan.mode=sync/async */
> +static int __init early_kasan_mode(char *arg)
> +{
> +       /* If arg is not set the default mode is sync */
> +       if ((!arg) || !strcmp(arg, "sync"))

Let's default to KASAN_ARG_MODE_DEFAULT like for other args:

if (!arg)
  return -EINVAL;

kasan_init_hw_tags_cpu()/kasan_init_hw_tags() already handle
KASAN_ARG_MODE_DEFAULT properly.

> +               kasan_arg_mode = KASAN_ARG_MODE_SYNC;
> +       else if (!strcmp(arg, "async"))
> +               kasan_arg_mode = KASAN_ARG_MODE_ASYNC;
> +       else
> +               return -EINVAL;
> +
> +       return 0;
> +}
> +early_param("kasan.mode", early_kasan_mode);
> +
>  /* kasan.stacktrace=off/on */
>  static int __init early_kasan_flag_stacktrace(char *arg)
>  {
> @@ -115,7 +141,15 @@ void kasan_init_hw_tags_cpu(void)
>                 return;
>
>         hw_init_tags(KASAN_TAG_MAX);
> -       hw_enable_tagging();
> +
> +       /*
> +        * Enable async mode only when explicitly requested through
> +        * the command line.
> +        */
> +       if (kasan_arg_mode == KASAN_ARG_MODE_ASYNC)
> +               hw_enable_tagging_async();
> +       else
> +               hw_enable_tagging_sync();
>  }
>
>  /* kasan_init_hw_tags() is called once on boot CPU. */
> @@ -132,6 +166,22 @@ void __init kasan_init_hw_tags(void)
>         /* Enable KASAN. */
>         static_branch_enable(&kasan_flag_enabled);
>
> +       switch (kasan_arg_mode) {
> +       case KASAN_ARG_MODE_DEFAULT:
> +               /*
> +                * Default to sync mode.
> +                * Do nothing, kasan_flag_async keeps its default value.
> +                */
> +               break;
> +       case KASAN_ARG_MODE_SYNC:
> +               /* Do nothing, kasan_flag_async keeps its default value. */
> +               break;
> +       case KASAN_ARG_MODE_ASYNC:
> +               /* Async mode enabled. */
> +               kasan_flag_async = true;
> +               break;
> +       }
> +
>         switch (kasan_arg_stacktrace) {
>         case KASAN_ARG_STACKTRACE_DEFAULT:
>                 /* Default to enabling stack trace collection. */
> diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
> index cc787ba47e1b..98f70ffc9e1c 100644
> --- a/mm/kasan/kasan.h
> +++ b/mm/kasan/kasan.h
> @@ -21,6 +21,7 @@ static inline bool kasan_stack_collection_enabled(void)
>  #endif
>
>  extern bool kasan_flag_panic __ro_after_init;
> +extern bool kasan_flag_async __ro_after_init;
>
>  #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
>  #define KASAN_GRANULE_SIZE     (1UL << KASAN_SHADOW_SCALE_SHIFT)
> @@ -294,7 +295,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag)
>  #define arch_set_mem_tag_range(addr, size, tag) ((void *)(addr))
>  #endif
>
> -#define hw_enable_tagging()                    arch_enable_tagging()
> +#define hw_enable_tagging_sync()               arch_enable_tagging_sync()
> +#define hw_enable_tagging_async()              arch_enable_tagging_async()
>  #define hw_init_tags(max_tag)                  arch_init_tags(max_tag)
>  #define hw_set_tagging_report_once(state)      arch_set_tagging_report_once(state)
>  #define hw_get_random_tag()                    arch_get_random_tag()
> @@ -303,7 +305,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag)
>
>  #else /* CONFIG_KASAN_HW_TAGS */
>
> -#define hw_enable_tagging()
> +#define hw_enable_tagging_sync()
> +#define hw_enable_tagging_async()
>  #define hw_set_tagging_report_once(state)
>
>  #endif /* CONFIG_KASAN_HW_TAGS */
> --
> 2.30.0
>
Vincenzo Frascino Feb. 12, 2021, 11:26 a.m. UTC | #2
On 2/11/21 5:50 PM, Andrey Konovalov wrote:
> Let's default to KASAN_ARG_MODE_DEFAULT like for other args:
> 
> if (!arg)
>   return -EINVAL;
> 
> kasan_init_hw_tags_cpu()/kasan_init_hw_tags() already handle
> KASAN_ARG_MODE_DEFAULT properly.

Ok, no problem, I will take care of it in the next version.
diff mbox series

Patch

diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index ddf4239a5890..6f6ab3ed7b79 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -161,6 +161,15 @@  particular KASAN features.
 
 - ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``).
 
+- ``kasan.mode=sync`` or ``=async`` controls whether KASAN is configured in
+  synchronous or asynchronous mode of execution (default: ``sync``).
+  Synchronous mode: a bad access is detected immediately when a tag
+  check fault occurs.
+  Asynchronous mode: a bad access detection is delayed. When a tag check
+  fault occurs, the information is stored in hardware (in the TFSR_EL1
+  register for arm64). The kernel periodically checks the hardware and
+  only reports tag faults during these checks.
+
 - ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
   traces collection (default: ``on``).
 
diff --git a/lib/test_kasan.c b/lib/test_kasan.c
index 1328c468fdb5..f8c72d3aed64 100644
--- a/lib/test_kasan.c
+++ b/lib/test_kasan.c
@@ -97,7 +97,7 @@  static void kasan_test_exit(struct kunit *test)
 			READ_ONCE(fail_data.report_found));	\
 	if (IS_ENABLED(CONFIG_KASAN_HW_TAGS)) {			\
 		if (READ_ONCE(fail_data.report_found))		\
-			hw_enable_tagging();			\
+			hw_enable_tagging_sync();		\
 		migrate_enable();				\
 	}							\
 } while (0)
diff --git a/mm/kasan/hw_tags.c b/mm/kasan/hw_tags.c
index 1dfe4f62a89e..bd249d1f6cdc 100644
--- a/mm/kasan/hw_tags.c
+++ b/mm/kasan/hw_tags.c
@@ -25,6 +25,12 @@  enum kasan_arg {
 	KASAN_ARG_ON,
 };
 
+enum kasan_arg_mode {
+	KASAN_ARG_MODE_DEFAULT,
+	KASAN_ARG_MODE_SYNC,
+	KASAN_ARG_MODE_ASYNC,
+};
+
 enum kasan_arg_stacktrace {
 	KASAN_ARG_STACKTRACE_DEFAULT,
 	KASAN_ARG_STACKTRACE_OFF,
@@ -38,6 +44,7 @@  enum kasan_arg_fault {
 };
 
 static enum kasan_arg kasan_arg __ro_after_init;
+static enum kasan_arg_mode kasan_arg_mode __ro_after_init;
 static enum kasan_arg_stacktrace kasan_arg_stacktrace __ro_after_init;
 static enum kasan_arg_fault kasan_arg_fault __ro_after_init;
 
@@ -45,6 +52,10 @@  static enum kasan_arg_fault kasan_arg_fault __ro_after_init;
 DEFINE_STATIC_KEY_FALSE(kasan_flag_enabled);
 EXPORT_SYMBOL(kasan_flag_enabled);
 
+/* Whether the asynchronous mode is enabled. */
+bool kasan_flag_async __ro_after_init;
+EXPORT_SYMBOL_GPL(kasan_flag_async);
+
 /* Whether to collect alloc/free stack traces. */
 DEFINE_STATIC_KEY_FALSE(kasan_flag_stacktrace);
 
@@ -68,6 +79,21 @@  static int __init early_kasan_flag(char *arg)
 }
 early_param("kasan", early_kasan_flag);
 
+/* kasan.mode=sync/async */
+static int __init early_kasan_mode(char *arg)
+{
+	/* If arg is not set the default mode is sync */
+	if ((!arg) || !strcmp(arg, "sync"))
+		kasan_arg_mode = KASAN_ARG_MODE_SYNC;
+	else if (!strcmp(arg, "async"))
+		kasan_arg_mode = KASAN_ARG_MODE_ASYNC;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+early_param("kasan.mode", early_kasan_mode);
+
 /* kasan.stacktrace=off/on */
 static int __init early_kasan_flag_stacktrace(char *arg)
 {
@@ -115,7 +141,15 @@  void kasan_init_hw_tags_cpu(void)
 		return;
 
 	hw_init_tags(KASAN_TAG_MAX);
-	hw_enable_tagging();
+
+	/*
+	 * Enable async mode only when explicitly requested through
+	 * the command line.
+	 */
+	if (kasan_arg_mode == KASAN_ARG_MODE_ASYNC)
+		hw_enable_tagging_async();
+	else
+		hw_enable_tagging_sync();
 }
 
 /* kasan_init_hw_tags() is called once on boot CPU. */
@@ -132,6 +166,22 @@  void __init kasan_init_hw_tags(void)
 	/* Enable KASAN. */
 	static_branch_enable(&kasan_flag_enabled);
 
+	switch (kasan_arg_mode) {
+	case KASAN_ARG_MODE_DEFAULT:
+		/*
+		 * Default to sync mode.
+		 * Do nothing, kasan_flag_async keeps its default value.
+		 */
+		break;
+	case KASAN_ARG_MODE_SYNC:
+		/* Do nothing, kasan_flag_async keeps its default value. */
+		break;
+	case KASAN_ARG_MODE_ASYNC:
+		/* Async mode enabled. */
+		kasan_flag_async = true;
+		break;
+	}
+
 	switch (kasan_arg_stacktrace) {
 	case KASAN_ARG_STACKTRACE_DEFAULT:
 		/* Default to enabling stack trace collection. */
diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h
index cc787ba47e1b..98f70ffc9e1c 100644
--- a/mm/kasan/kasan.h
+++ b/mm/kasan/kasan.h
@@ -21,6 +21,7 @@  static inline bool kasan_stack_collection_enabled(void)
 #endif
 
 extern bool kasan_flag_panic __ro_after_init;
+extern bool kasan_flag_async __ro_after_init;
 
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 #define KASAN_GRANULE_SIZE	(1UL << KASAN_SHADOW_SCALE_SHIFT)
@@ -294,7 +295,8 @@  static inline const void *arch_kasan_set_tag(const void *addr, u8 tag)
 #define arch_set_mem_tag_range(addr, size, tag) ((void *)(addr))
 #endif
 
-#define hw_enable_tagging()			arch_enable_tagging()
+#define hw_enable_tagging_sync()		arch_enable_tagging_sync()
+#define hw_enable_tagging_async()		arch_enable_tagging_async()
 #define hw_init_tags(max_tag)			arch_init_tags(max_tag)
 #define hw_set_tagging_report_once(state)	arch_set_tagging_report_once(state)
 #define hw_get_random_tag()			arch_get_random_tag()
@@ -303,7 +305,8 @@  static inline const void *arch_kasan_set_tag(const void *addr, u8 tag)
 
 #else /* CONFIG_KASAN_HW_TAGS */
 
-#define hw_enable_tagging()
+#define hw_enable_tagging_sync()
+#define hw_enable_tagging_async()
 #define hw_set_tagging_report_once(state)
 
 #endif /* CONFIG_KASAN_HW_TAGS */