diff mbox series

[1/2] mt76: mt7915: fix unused 'mode' variable

Message ID 20210225145953.404859-1-arnd@kernel.org (mailing list archive)
State New, archived
Headers show
Series [1/2] mt76: mt7915: fix unused 'mode' variable | expand

Commit Message

Arnd Bergmann Feb. 25, 2021, 2:59 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

clang points out a possible corner case in the mt7915_tm_set_tx_cont()
function if called with invalid arguments:

drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
        rateval =  mode << 6 | rate_idx;
                   ^~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
        u8 rate_idx = td->tx_rate_idx, mode;
                                           ^

Change it to return an error instead of continuing with invalid data
here.

Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Nathan Chancellor Feb. 25, 2021, 5:58 p.m. UTC | #1
On Thu, Feb 25, 2021 at 03:59:14PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> clang points out a possible corner case in the mt7915_tm_set_tx_cont()
> function if called with invalid arguments:
> 
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
>         default:
>         ^~~~~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
>         rateval =  mode << 6 | rate_idx;
>                    ^~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
>         u8 rate_idx = td->tx_rate_idx, mode;
>                                            ^
> 
> Change it to return an error instead of continuing with invalid data
> here.
> 
> Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
> index 7fb2170a9561..aa629e1fb420 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
> @@ -543,6 +543,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
>  		tx_cont->bw = CMD_CBW_20MHZ;
>  		break;
>  	default:
> +		return -EINVAL;

Remove the break if we are adding a return?

>  		break;
>  	}
>  
> @@ -591,6 +592,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
>  		mode = MT_PHY_TYPE_HE_MU;
>  		break;
>  	default:
> +		return -EINVAL;
>  		break;
>  	}
>  
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index 7fb2170a9561..aa629e1fb420 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -543,6 +543,7 @@  mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		tx_cont->bw = CMD_CBW_20MHZ;
 		break;
 	default:
+		return -EINVAL;
 		break;
 	}
 
@@ -591,6 +592,7 @@  mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		mode = MT_PHY_TYPE_HE_MU;
 		break;
 	default:
+		return -EINVAL;
 		break;
 	}