@@ -54,25 +54,6 @@ static int __init iommu_init_mempool(void)
return 0;
}
-/* Map the DMA window corresponding to the LIODN */
-static int map_liodn(int liodn, struct fsl_dma_domain *dma_domain)
-{
- int ret;
- struct iommu_domain_geometry *geom = &dma_domain->iommu_domain.geometry;
- unsigned long flags;
-
- spin_lock_irqsave(&iommu_lock, flags);
- ret = pamu_config_ppaace(liodn, geom->aperture_start,
- geom->aperture_end - 1, ~(u32)0,
- 0, dma_domain->snoop_id, dma_domain->stash_id,
- PAACE_AP_PERMS_QUERY | PAACE_AP_PERMS_UPDATE);
- spin_unlock_irqrestore(&iommu_lock, flags);
- if (ret)
- pr_debug("PAACE configuration failed for liodn %d\n", liodn);
-
- return ret;
-}
-
static int update_liodn_stash(int liodn, struct fsl_dma_domain *dma_domain,
u32 val)
{
@@ -94,11 +75,11 @@ static int update_liodn_stash(int liodn, struct fsl_dma_domain *dma_domain,
}
/* Set the geometry parameters for a LIODN */
-static int pamu_set_liodn(int liodn, struct device *dev,
- struct fsl_dma_domain *dma_domain,
- struct iommu_domain_geometry *geom_attr)
+static int pamu_set_liodn(struct fsl_dma_domain *dma_domain, struct device *dev,
+ int liodn)
{
- phys_addr_t window_addr, window_size;
+ struct iommu_domain *domain = &dma_domain->iommu_domain;
+ struct iommu_domain_geometry *geom = &domain->geometry;
u32 omi_index = ~(u32)0;
unsigned long flags;
int ret;
@@ -110,22 +91,25 @@ static int pamu_set_liodn(int liodn, struct device *dev,
*/
get_ome_index(&omi_index, dev);
- window_addr = geom_attr->aperture_start;
- window_size = geom_attr->aperture_end + 1;
-
spin_lock_irqsave(&iommu_lock, flags);
ret = pamu_disable_liodn(liodn);
- if (!ret)
- ret = pamu_config_ppaace(liodn, window_addr, window_size, omi_index,
- 0, dma_domain->snoop_id,
- dma_domain->stash_id, 0);
+ if (ret)
+ goto out_unlock;
+ ret = pamu_config_ppaace(liodn, geom->aperture_start,
+ geom->aperture_end - 1, omi_index, 0,
+ dma_domain->snoop_id, dma_domain->stash_id, 0);
+ if (ret)
+ goto out_unlock;
+ ret = pamu_config_ppaace(liodn, geom->aperture_start,
+ geom->aperture_end - 1, ~(u32)0,
+ 0, dma_domain->snoop_id, dma_domain->stash_id,
+ PAACE_AP_PERMS_QUERY | PAACE_AP_PERMS_UPDATE);
+out_unlock:
spin_unlock_irqrestore(&iommu_lock, flags);
if (ret) {
pr_debug("PAACE configuration failed for liodn %d\n",
liodn);
- return ret;
}
-
return ret;
}
@@ -265,7 +249,6 @@ static int handle_attach_device(struct fsl_dma_domain *dma_domain,
int num)
{
unsigned long flags;
- struct iommu_domain *domain = &dma_domain->iommu_domain;
int ret = 0;
int i;
@@ -280,21 +263,7 @@ static int handle_attach_device(struct fsl_dma_domain *dma_domain,
}
attach_device(dma_domain, liodn[i], dev);
- /*
- * Check if geometry has already been configured
- * for the domain. If yes, set the geometry for
- * the LIODN.
- */
- ret = pamu_set_liodn(liodn[i], dev, dma_domain,
- &domain->geometry);
- if (ret)
- break;
-
- /*
- * Create window/subwindow mapping for
- * the LIODN.
- */
- ret = map_liodn(liodn[i], dma_domain);
+ ret = pamu_set_liodn(dma_domain, dev, liodn[i]);
if (ret)
break;
}
Merge the two fuctions that configure the ppaace into a single coherent function. I somehow doubt we need the two pamu_config_ppaace calls, but keep the existing behavior just to be on the safe side. Signed-off-by: Christoph Hellwig <hch@lst.de> --- drivers/iommu/fsl_pamu_domain.c | 65 +++++++++------------------------ 1 file changed, 17 insertions(+), 48 deletions(-)