| Message ID | 20210303192114.12292-2-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ti: am642x: add CPSW3g DT nodes | expand |
On 04/03/21 12:51 am, Grygorii Strashko wrote: > From: Vignesh Raghavendra <vigneshr@ti.com> > > Add CPSW3g DT node with two external ports, MDIO and CPTS support. For > CPSW3g DMA channels the ASEL is set to 15 (AM642x per DMA channel coherency > feature), so that CPSW DMA channel participates in Coherency and thus avoid > need to cache maintenance for SKBs. This improves bidirectional TCP > performance by up to 100Mbps (on 1G link). > > Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> nit pick. In $subject : k3-am64-main. Thanks and regards, Lokesh > --- > arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 74 ++++++++++++++++++++++++ > arch/arm64/boot/dts/ti/k3-am64.dtsi | 2 + > 2 files changed, 76 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > index 5f85950daef7..80443dbf272c 100644 > --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi > @@ -178,6 +178,12 @@ > compatible = "ti,am654-chipid"; > reg = <0x00000014 0x4>; > }; > + > + phy_gmii_sel: phy@4044 { > + compatible = "ti,am654-phy-gmii-sel"; > + reg = <0x4044 0x8>; > + #phy-cells = <1>; > + }; > }; > > main_uart0: serial@2800000 { > @@ -402,4 +408,72 @@ > ti,otap-del-sel-ddr50 = <0x9>; > ti,clkbuf-sel = <0x7>; > }; > + > + cpsw3g: ethernet@8000000 { > + compatible = "ti,am642-cpsw-nuss"; > + #address-cells = <2>; > + #size-cells = <2>; > + reg = <0x0 0x8000000 0x0 0x200000>; > + reg-names = "cpsw_nuss"; > + ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; > + clocks = <&k3_clks 13 0>; > + assigned-clocks = <&k3_clks 13 1>; > + assigned-clock-parents = <&k3_clks 13 9>; > + clock-names = "fck"; > + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; > + > + dmas = <&main_pktdma 0xC500 15>, > + <&main_pktdma 0xC501 15>, > + <&main_pktdma 0xC502 15>, > + <&main_pktdma 0xC503 15>, > + <&main_pktdma 0xC504 15>, > + <&main_pktdma 0xC505 15>, > + <&main_pktdma 0xC506 15>, > + <&main_pktdma 0xC507 15>, > + <&main_pktdma 0x4500 15>; > + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", > + "tx7", "rx"; > + > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpsw_port1: port@1 { > + reg = <1>; > + ti,mac-only; > + label = "port1"; > + phys = <&phy_gmii_sel 1>; > + mac-address = [00 00 de ad be ef]; > + }; > + > + cpsw_port2: port@2 { > + reg = <2>; > + ti,mac-only; > + label = "port2"; > + phys = <&phy_gmii_sel 2>; > + mac-address = [00 01 de ad be ef]; > + }; > + }; > + > + cpsw3g_mdio: mdio@f00 { > + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; > + reg = <0x0 0xf00 0x0 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&k3_clks 13 0>; > + clock-names = "fck"; > + bus_freq = <1000000>; > + }; > + > + cpts@3d000 { > + compatible = "ti,j721e-cpts"; > + reg = <0x0 0x3d000 0x0 0x400>; > + clocks = <&k3_clks 13 1>; > + clock-names = "cpts"; > + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "cpts"; > + ti,cpts-ext-ts-inputs = <4>; > + ti,cpts-periodic-outputs = <2>; > + }; > + }; > }; > diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi > index 0ae8c844c482..de6805b0c72c 100644 > --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi > @@ -28,6 +28,8 @@ > serial6 = &main_uart4; > serial7 = &main_uart5; > serial8 = &main_uart6; > + ethernet0 = &cpsw_port1; > + ethernet1 = &cpsw_port2; > }; > > chosen { }; >
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 5f85950daef7..80443dbf272c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -178,6 +178,12 @@ compatible = "ti,am654-chipid"; reg = <0x00000014 0x4>; }; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; }; main_uart0: serial@2800000 { @@ -402,4 +408,72 @@ ti,otap-del-sel-ddr50 = <0x9>; ti,clkbuf-sel = <0x7>; }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x8000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 1>; + assigned-clock-parents = <&k3_clks 13 9>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_pktdma 0xC500 15>, + <&main_pktdma 0xC501 15>, + <&main_pktdma 0xC502 15>, + <&main_pktdma 0xC503 15>, + <&main_pktdma 0xC504 15>, + <&main_pktdma 0xC505 15>, + <&main_pktdma 0xC506 15>, + <&main_pktdma 0xC507 15>, + <&main_pktdma 0x4500 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 de ad be ef]; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 01 de ad be ef]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 13 1>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index 0ae8c844c482..de6805b0c72c 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -28,6 +28,8 @@ serial6 = &main_uart4; serial7 = &main_uart5; serial8 = &main_uart6; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; chosen { };