@@ -124,6 +124,9 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -575,6 +578,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
+ pinctrl_usbotg_vbus: usbotgvbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
Add VBUS regulator GPIO information, so that USB OTG port can also be used in host mode. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- arch/arm/boot/dts/imx6q-ba16.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)