| Message ID | 20210312102713.27776-1-devik@eaxlabs.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/2] dt-bindings: serial: Add rx-tx-swap to stm32-usart | expand |
On Fri, 12 Mar 2021 11:27:12 +0100, Martin Devera wrote: > Add new rx-tx-swap property to allow for RX & TX pin swapping. > > Signed-off-by: Martin Devera <devik@eaxlabs.cz> > Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> > --- > v6: > - add version changelog > v5: > - yaml fixes based on Rob Herring comments > - add serial.yaml reference > - move compatible from 'then' to 'if' > v3: > - don't allow rx-tx-swap for st,stm32-uart (suggested > by Fabrice Gasnier) > v2: > - change st,swap to rx-tx-swap (suggested by Rob Herring) > --- > .../devicetree/bindings/serial/st,stm32-uart.yaml | 29 ++++++++++++++-------- > 1 file changed, 19 insertions(+), 10 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/serial/st,stm32-uart.yaml:81:12: [warning] wrong indentation: expected 10 but found 11 (indentation) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1451861 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 3/12/21 3:23 PM, Rob Herring wrote: > On Fri, 12 Mar 2021 11:27:12 +0100, Martin Devera wrote: >> Add new rx-tx-swap property to allow for RX & TX pin swapping. >> >> Signed-off-by: Martin Devera <devik@eaxlabs.cz> >> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> >> --- >> v6: >> - add version changelog >> v5: >> - yaml fixes based on Rob Herring comments >> - add serial.yaml reference >> - move compatible from 'then' to 'if' >> v3: >> - don't allow rx-tx-swap for st,stm32-uart (suggested >> by Fabrice Gasnier) >> v2: >> - change st,swap to rx-tx-swap (suggested by Rob Herring) >> --- >> .../devicetree/bindings/serial/st,stm32-uart.yaml | 29 ++++++++++++++-------- >> 1 file changed, 19 insertions(+), 10 deletions(-) >> > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > ./Documentation/devicetree/bindings/serial/st,stm32-uart.yaml:81:12: [warning] wrong indentation: expected 10 but found 11 (indentation) > > dtschema/dtc warnings/errors: > > See https://patchwork.ozlabs.org/patch/1451861 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > Yoy are right, there is one extra space. But for some reason the check doesn't find it: $ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/st,stm32-uart.yaml CHKDT Documentation/devicetree/bindings/processed-schema-examples.json SCHEMA Documentation/devicetree/bindings/processed-schema-examples.json /home/devik/.local/lib/python3.9/site-packages/dtschema/schemas/serial/rs485.yaml: duplicate '$id' value 'http://devicetree.org/schemas/serial/rs485.yaml#' DTEX Documentation/devicetree/bindings/serial/st,stm32-uart.example.dts DTC Documentation/devicetree/bindings/serial/st,stm32-uart.example.dt.yaml CHECK Documentation/devicetree/bindings/serial/st,stm32-uart.example.dt.yaml $ git describe v5.12-rc2-2-g2f2a4a95dd38 $ pip3 show dtschema Name: dtschema Version: 2021.2.1 Any idea why ? Thanks, Martin
On 3/12/21 3:56 PM, Martin DEVERA wrote: > On 3/12/21 3:23 PM, Rob Herring wrote: >> On Fri, 12 Mar 2021 11:27:12 +0100, Martin Devera wrote: >>> Add new rx-tx-swap property to allow for RX & TX pin swapping. >>> >>> Signed-off-by: Martin Devera <devik@eaxlabs.cz> >>> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> >>> --- >>> v6: >>> - add version changelog >>> v5: >>> - yaml fixes based on Rob Herring comments >>> - add serial.yaml reference >>> - move compatible from 'then' to 'if' >>> v3: >>> - don't allow rx-tx-swap for st,stm32-uart (suggested >>> by Fabrice Gasnier) >>> v2: >>> - change st,swap to rx-tx-swap (suggested by Rob Herring) >>> --- >>> .../devicetree/bindings/serial/st,stm32-uart.yaml | 29 >>> ++++++++++++++-------- >>> 1 file changed, 19 insertions(+), 10 deletions(-) >>> >> My bot found errors running 'make dt_binding_check' on your patch: >> >> yamllint warnings/errors: >> ./Documentation/devicetree/bindings/serial/st,stm32-uart.yaml:81:12: >> [warning] wrong indentation: expected 10 but found 11 (indentation) >> >> dtschema/dtc warnings/errors: >> >> See https://patchwork.ozlabs.org/patch/1451861 >> >> This check can fail if there are any dependencies. The base for a patch >> series is generally the most recent rc1. >> >> If you already ran 'make dt_binding_check' and didn't see the above >> error(s), then make sure 'yamllint' is installed and dt-schema is up to >> date: >> >> pip3 install dtschema --upgrade >> > Yoy are right, there is one extra space. But for some reason the check > doesn't > find it: Argh... sorry, ignore it please. It seems I removed yamllint. I see the error now.
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 8631678283f9..68a0f3ce8328 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -9,9 +9,6 @@ maintainers: title: STMicroelectronics STM32 USART bindings -allOf: - - $ref: rs485.yaml - properties: compatible: enum: @@ -40,6 +37,8 @@ properties: uart-has-rtscts: true + rx-tx-swap: true + dmas: minItems: 1 maxItems: 2 @@ -66,13 +65,23 @@ properties: linux,rs485-enabled-at-boot-time: true rs485-rx-during-tx: true -if: - required: - - st,hw-flow-ctrl -then: - properties: - cts-gpios: false - rts-gpios: false +allOf: + - $ref: rs485.yaml# + - $ref: serial.yaml# + - if: + required: + - st,hw-flow-ctrl + then: + properties: + cts-gpios: false + rts-gpios: false + - if: + properties: + compatible: + const: st,stm32-uart + then: + properties: + rx-tx-swap: false required: - compatible