@@ -83,16 +83,12 @@
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0",
- "clk-ic-lmi1";
- clock-critical = <CLK_IC_LMI0>;
};
};
@@ -135,7 +131,7 @@
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
@@ -145,52 +141,6 @@
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-proc-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-ext2fa9",
- "clk-ic-bdisp-0",
- "clk-ic-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-disp-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phy",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp",
- "clk-tx-icn-hades",
- "clk-rx-icn-hades",
- "clk-icn-reg-16",
- "clk-pp-hades",
- "clk-clust-hades",
- "clk-hwpe-hades",
- "clk-fc-hades";
- clock-critical = <CLK_PROC_STFE>,
- <CLK_ICN_CPU>,
- <CLK_TX_ICN_DMU>,
- <CLK_EXT2F_A9>,
- <CLK_ICN_LMI>,
- <CLK_ICN_SBC>;
-
/*
* ARM Peripheral clock for timers
*/
@@ -227,20 +177,13 @@
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff",
- "clk-pcmr10-master",
- "clk-usb2-phy";
};
};
@@ -263,7 +206,7 @@
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
@@ -272,24 +215,7 @@
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "clk-pix-pip",
- "clk-pix-gdp1",
- "clk-pix-gdp2",
- "clk-pix-gdp3",
- "clk-pix-gdp4",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy";
- };
+ };
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -311,22 +237,13 @@
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
With the introduction of new flexgen compatible within the clk-flexgen driver, remove the clock-output-names entry from the flexgen nodes and set the new proper compatible corresponding. Signed-off-by: Alain Volmat <avolmat@me.com> --- arch/arm/boot/dts/stih410-clock.dtsi | 95 ++-------------------------- 1 file changed, 6 insertions(+), 89 deletions(-)