diff mbox series

[v14,02/10] iommu/arm-smmu-v3: Use device properties for pasid-num-bits

Message ID 20210401154718.307519-3-jean-philippe@linaro.org (mailing list archive)
State New, archived
Headers show
Series iommu: I/O page faults for SMMUv3 | expand

Commit Message

Jean-Philippe Brucker April 1, 2021, 3:47 p.m. UTC 
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 include/linux/iommu.h                       |  2 --
 drivers/acpi/arm64/iort.c                   | 13 +++++++------
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |  3 ++-
 drivers/iommu/of_iommu.c                    |  5 -----
 4 files changed, 9 insertions(+), 14 deletions(-)

Comments

Hanjun Guo April 2, 2021, 12:35 a.m. UTC | #1 
On 2021/4/1 23:47, Jean-Philippe Brucker wrote:
> The pasid-num-bits property shouldn't need a dedicated fwspec field,
> it's a job for device properties. Add properties for IORT, and access
> the number of PASID bits using device_property_read_u32().
> 
> Suggested-by: Robin Murphy<robin.murphy@arm.com>
> Acked-by: Jonathan Cameron<Jonathan.Cameron@huawei.com>
> Acked-by: Will Deacon<will@kernel.org>
> Reviewed-by: Eric Auger<eric.auger@redhat.com>
> Signed-off-by: Jean-Philippe Brucker<jean-philippe@linaro.org>
> ---
>   include/linux/iommu.h                       |  2 --
>   drivers/acpi/arm64/iort.c                   | 13 +++++++------

Acked-by: Hanjun Guo <guohanjun@huawei.com>
diff mbox series

Patch

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 1d422bf722a1..16ce75693d83 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -572,7 +572,6 @@  struct iommu_group *fsl_mc_device_group(struct device *dev);
  * @ops: ops for this device's IOMMU
  * @iommu_fwnode: firmware handle for this device's IOMMU
  * @flags: IOMMU_FWSPEC_* flags
- * @num_pasid_bits: number of PASID bits supported by this device
  * @num_ids: number of associated device IDs
  * @ids: IDs which this device may present to the IOMMU
  */
@@ -580,7 +579,6 @@  struct iommu_fwspec {
 	const struct iommu_ops	*ops;
 	struct fwnode_handle	*iommu_fwnode;
 	u32			flags;
-	u32			num_pasid_bits;
 	unsigned int		num_ids;
 	u32			ids[];
 };
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 2494138a6905..3912a1f6058e 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -968,15 +968,16 @@  static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
 static void iort_named_component_init(struct device *dev,
 				      struct acpi_iort_node *node)
 {
+	struct property_entry props[2] = {};
 	struct acpi_iort_named_component *nc;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	if (!fwspec)
-		return;
 
 	nc = (struct acpi_iort_named_component *)node->node_data;
-	fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS,
-					   nc->node_flags);
+	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
+				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
+						nc->node_flags));
+
+	if (device_add_properties(dev, props))
+		dev_warn(dev, "Could not add device properties\n");
 }
 
 static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 941ba5484731..bd77495023c8 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2395,7 +2395,8 @@  static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 		}
 	}
 
-	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
+	device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits);
+	master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits);
 
 	/*
 	 * Note that PASID must be enabled before, and disabled after ATS:
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index e505b9130a1c..a9d2df001149 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -210,11 +210,6 @@  const struct iommu_ops *of_iommu_configure(struct device *dev,
 					     of_pci_iommu_init, &info);
 	} else {
 		err = of_iommu_configure_device(master_np, dev, id);
-
-		fwspec = dev_iommu_fwspec_get(dev);
-		if (!err && fwspec)
-			of_property_read_u32(master_np, "pasid-num-bits",
-					     &fwspec->num_pasid_bits);
 	}
 
 	/*