diff mbox series

[v3,3/4] drivers/tty/serial/8250: add aspeed, lpc-address and aspeed, sirq DT properties

Message ID 20210402004716.15961-4-zev@bewilderbeest.net (mailing list archive)
State New, archived
Headers show
Series aspeed-vuart: generalized DT properties | expand

Commit Message

Zev Weiss April 2, 2021, 12:47 a.m. UTC
These allow describing all the Aspeed VUART attributes currently
available via sysfs.  aspeed,sirq provides a replacement for the
deprecated aspeed,sirq-polarity-sense property.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---
 drivers/tty/serial/8250/8250_aspeed_vuart.c | 44 ++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 8433f8dbb186..10b1f33386e6 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -28,6 +28,10 @@ 
 #define ASPEED_VUART_ADDRL		0x28
 #define ASPEED_VUART_ADDRH		0x2c
 
+#define ASPEED_VUART_DEFAULT_LPC_ADDR	0x3f8
+#define ASPEED_VUART_DEFAULT_SIRQ	4
+#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY	IRQ_TYPE_LEVEL_LOW
+
 struct aspeed_vuart {
 	struct device		*dev;
 	void __iomem		*regs;
@@ -393,7 +397,8 @@  static int aspeed_vuart_probe(struct platform_device *pdev)
 	struct aspeed_vuart *vuart;
 	struct device_node *np;
 	struct resource *res;
-	u32 clk, prop;
+	u32 clk, prop, sirq[2];
+	bool sirq_polarity;
 	int rc;
 
 	np = pdev->dev.of_node;
@@ -501,6 +506,43 @@  static int aspeed_vuart_probe(struct platform_device *pdev)
 		of_node_put(sirq_polarity_sense_args.np);
 	}
 
+	rc = of_property_read_u32(np, "aspeed,lpc-address", &prop);
+	if (rc < 0)
+		prop = ASPEED_VUART_DEFAULT_LPC_ADDR;
+
+	rc = aspeed_vuart_set_lpc_address(vuart, prop);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "invalid value in aspeed,lpc-address property\n");
+		goto err_clk_disable;
+	}
+
+	rc = of_property_read_u32_array(np, "aspeed,sirq", sirq, 2);
+	if (rc < 0) {
+		sirq[0] = ASPEED_VUART_DEFAULT_SIRQ;
+		sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY;
+	}
+
+	rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "invalid sirq number in aspeed,sirq property\n");
+		goto err_clk_disable;
+	}
+
+	switch (sirq[1]) {
+	case IRQ_TYPE_LEVEL_LOW:
+		sirq_polarity = false;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		sirq_polarity = true;
+		break;
+	default:
+		dev_err(&pdev->dev, "invalid sirq polarity in aspeed,sirq property\n");
+		rc = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
+
 	aspeed_vuart_set_enabled(vuart, true);
 	aspeed_vuart_set_host_tx_discard(vuart, true);
 	platform_set_drvdata(pdev, vuart);