diff mbox series

[2/2] arm64: dts: imx8mm: Add spba1 and spba2 buses

Message ID 20210406013344.124255-2-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: imx8mn: Add spba1 bus | expand

Commit Message

Adam Ford April 6, 2021, 1:33 a.m. UTC 
The i.MX8MM reference manual shows there are two spba busses.
SPBA1 handles much of the serial interfaces, and SPBA2 covers much
of the audio.

Add both of them.

Signed-off-by: Adam Ford <aford173@gmail.com>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a27e02bee6b4..64aa38fd2b6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -271,117 +271,125 @@  aips1: bus@30000000 {
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
 
-			sai1: sai@30010000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-				reg = <0x30010000 0x10000>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
-					 <&clk IMX8MM_CLK_SAI1_ROOT>,
-					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+			spba2: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai1: sai@30010000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30010000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+						 <&clk IMX8MM_CLK_SAI1_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			sai2: sai@30020000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-				reg = <0x30020000 0x10000>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
-					<&clk IMX8MM_CLK_SAI2_ROOT>,
-					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				sai2: sai@30020000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+						<&clk IMX8MM_CLK_SAI2_ROOT>,
+						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			sai3: sai@30030000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-				reg = <0x30030000 0x10000>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
-					 <&clk IMX8MM_CLK_SAI3_ROOT>,
-					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				sai3: sai@30030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+						 <&clk IMX8MM_CLK_SAI3_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			sai5: sai@30050000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-				reg = <0x30050000 0x10000>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
-					 <&clk IMX8MM_CLK_SAI5_ROOT>,
-					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				sai5: sai@30050000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+						 <&clk IMX8MM_CLK_SAI5_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			sai6: sai@30060000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
-				reg = <0x30060000 0x10000>;
-				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
-					 <&clk IMX8MM_CLK_SAI6_ROOT>,
-					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				sai6: sai@30060000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+						 <&clk IMX8MM_CLK_SAI6_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			micfil: audio-controller@30080000 {
-				compatible = "fsl,imx8mm-micfil";
-				reg = <0x30080000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_PDM_IPG>,
-					 <&clk IMX8MM_CLK_PDM_ROOT>,
-					 <&clk IMX8MM_AUDIO_PLL1_OUT>,
-					 <&clk IMX8MM_AUDIO_PLL2_OUT>,
-					 <&clk IMX8MM_CLK_EXT3>;
-				clock-names = "ipg_clk", "ipg_clk_app",
-					      "pll8k", "pll11k", "clkext3";
-				dmas = <&sdma2 24 25 0x80000000>;
-				dma-names = "rx";
-				status = "disabled";
-			};
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+						 <&clk IMX8MM_CLK_PDM_ROOT>,
+						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MM_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					status = "disabled";
+				};
 
-			spdif1: spdif@30090000 {
-				compatible = "fsl,imx35-spdif";
-				reg = <0x30090000 0x10000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
-					 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
-					 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
-					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
-					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
-					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
-					 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
-					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
-					 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
-					 <&clk IMX8MM_CLK_DUMMY>; /* spba */
-				clock-names = "core", "rxtx0",
-					      "rxtx1", "rxtx2",
-					      "rxtx3", "rxtx4",
-					      "rxtx5", "rxtx6",
-					      "rxtx7", "spba";
-				dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 			};
 
 			gpio1: gpio@30200000 {
@@ -670,80 +678,88 @@  aips3: bus@30800000 {
 			ranges = <0x30800000 0x30800000 0x400000>,
 				 <0x8000000 0x8000000 0x10000000>;
 
-			ecspi1: spi@30820000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+			spba1: spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
-					 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			ecspi2: spi@30830000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
-					 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			ecspi3: spi@30840000 {
-				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
-					 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart1: serial@30860000 {
-				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
-					 <&clk IMX8MM_CLK_UART1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+						 <&clk IMX8MM_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart3: serial@30880000 {
-				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
-					 <&clk IMX8MM_CLK_UART3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+						 <&clk IMX8MM_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
 
-			uart2: serial@30890000 {
-				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
-					 <&clk IMX8MM_CLK_UART2_ROOT>;
-				clock-names = "ipg", "per";
-				status = "disabled";
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+						 <&clk IMX8MM_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
 			};
 
 			crypto: crypto@30900000 {