@@ -140,5 +140,35 @@ smi_common: smi@14017000 {
clock-names = "apb", "smi";
power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
};
+
+ larb0: larb@14016000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x14016000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+ };
+
+ larb1: larb@15001000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_LARB1_SMI>,
+ <&imgsys CLK_IMG_LARB1_SMI>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_ISP>;
+ };
+
+ larb2: larb@16010000 {
+ compatible = "mediatek,mt8167-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys CLK_VDEC_CKEN>,
+ <&vdecsys CLK_VDEC_LARB1_CKEN>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>;
+ };
};
};
Add larb nodes for MT8167: * larb0 is used for display (dsi and hdmi) * larb1 is used for camera (csi) * larb2 is used for the video hardware decoder Signed-off-by: Fabien Parent <fparent@baylibre.com> --- Note: This series is based on https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=v5.12-next/dts64-2 V2: * Removed unneeded mediatek,larb-id property arch/arm64/boot/dts/mediatek/mt8167.dtsi | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+)