| Message ID | 20210409113116.482199-2-eugen.hristev@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] ARM: at91: add new SoC sama7g5 | expand |
On 09/04/2021 at 13:31, Eugen Hristev wrote: > Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the > ROM bootloader uses. > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> and queued in at91-soc branch for 5.15. > --- > arch/arm/Kconfig.debug | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index 9e0b5e7f12af..7598624ce6dd 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -191,6 +191,14 @@ choice > their output to the USART1 port on SAMV7 based > machines. > > + config DEBUG_AT91_SAMA7G5_FLEXCOM3 > + bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" > + select DEBUG_AT91_UART > + depends on SOC_SAMA7G5 > + help > + Say Y here if you want kernel low-level debugging support > + on the FLEXCOM3 port of SAMA7G5. > + > config DEBUG_BCM2835 > bool "Kernel low-level debugging on BCM2835 PL011 UART" > depends on ARCH_BCM2835 && ARCH_MULTI_V6 > @@ -1657,6 +1665,7 @@ config DEBUG_UART_PHYS > default 0xd4017000 if DEBUG_MMP_UART2 > default 0xd4018000 if DEBUG_MMP_UART3 > default 0xe0000000 if DEBUG_SPEAR13XX > + default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 > default 0xe4007000 if DEBUG_HIP04_UART > default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 > default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 > @@ -1718,6 +1727,7 @@ config DEBUG_UART_VIRT > default 0xc8821000 if DEBUG_RV1108_UART1 > default 0xc8912000 if DEBUG_RV1108_UART0 > default 0xe0010fe0 if ARCH_RPC > + default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 > default 0xf0010000 if DEBUG_ASM9260_UART > default 0xf0100000 if DEBUG_DIGICOLOR_UA0 > default 0xf01fb000 if DEBUG_NOMADIK_UART >
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9e0b5e7f12af..7598624ce6dd 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -191,6 +191,14 @@ choice their output to the USART1 port on SAMV7 based machines. + config DEBUG_AT91_SAMA7G5_FLEXCOM3 + bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" + select DEBUG_AT91_UART + depends on SOC_SAMA7G5 + help + Say Y here if you want kernel low-level debugging support + on the FLEXCOM3 port of SAMA7G5. + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 && ARCH_MULTI_V6 @@ -1657,6 +1665,7 @@ config DEBUG_UART_PHYS default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if DEBUG_SPEAR13XX + default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xe4007000 if DEBUG_HIP04_UART default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 @@ -1718,6 +1727,7 @@ config DEBUG_UART_VIRT default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 default 0xe0010fe0 if ARCH_RPC + default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART
Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the ROM bootloader uses. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- arch/arm/Kconfig.debug | 10 ++++++++++ 1 file changed, 10 insertions(+)