diff mbox series

ARM: dts: aspeed: update e3c246d4i vuart properties

Message ID 20210416075113.18047-1-zev@bewilderbeest.net (mailing list archive)
State New, archived
Headers show
Series ARM: dts: aspeed: update e3c246d4i vuart properties | expand

Commit Message

Zev Weiss April 16, 2021, 7:51 a.m. UTC
This device-tree was merged with a provisional vuart IRQ-polarity
property that was still under review and ended up taking a somewhat
different form.  This patch updates it to match the final form of the
new vuart properties, which additionally allow specifying the SIRQ
number and LPC address.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---

The relevant aspeed-vuart patches [0] have been merged into Greg KH's
tty-next tree, so I figure it's probably okay to proceed with the
corresponding dts adjustments now.

[0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/

 arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Andrew Jeffery April 27, 2021, 3:59 a.m. UTC | #1
On Fri, 16 Apr 2021, at 17:21, Zev Weiss wrote:
> This device-tree was merged with a provisional vuart IRQ-polarity
> property that was still under review and ended up taking a somewhat
> different form.  This patch updates it to match the final form of the
> new vuart properties, which additionally allow specifying the SIRQ
> number and LPC address.
> 
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Joel Stanley July 1, 2021, 3:12 a.m. UTC | #2
On Fri, 16 Apr 2021 at 07:52, Zev Weiss <zev@bewilderbeest.net> wrote:
>
> This device-tree was merged with a provisional vuart IRQ-polarity
> property that was still under review and ended up taking a somewhat
> different form.  This patch updates it to match the final form of the
> new vuart properties, which additionally allow specifying the SIRQ
> number and LPC address.
>
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>


Fixes: ca03042f0f12 ("serial: 8250_aspeed_vuart: add aspeed,
lpc-io-reg and aspeed, lpc-interrupts DT properties")
Reviewed-by: Joel Stanley <joel@jms.id.au>

> ---
>
> The relevant aspeed-vuart patches [0] have been merged into Greg KH's
> tty-next tree, so I figure it's probably okay to proceed with the
> corresponding dts adjustments now.
>
> [0] https://lore.kernel.org/openbmc/20210412034712.16778-1-zev@bewilderbeest.net/
>
>  arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> index dcab6e78dfa4..8be40c8283af 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
> @@ -4,6 +4,7 @@
>  #include "aspeed-g5.dtsi"
>  #include <dt-bindings/gpio/aspeed-gpio.h>
>  #include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
>  /{
>         model = "ASRock E3C246D4I BMC";
> @@ -73,7 +74,8 @@ &uart5 {
>
>  &vuart {
>         status = "okay";
> -       aspeed,sirq-active-high;
> +       aspeed,lpc-io-reg = <0x2f8>;
> +       aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
>  };
>
>  &mac0 {
> --
> 2.31.1
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
index dcab6e78dfa4..8be40c8283af 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -4,6 +4,7 @@ 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 /{
 	model = "ASRock E3C246D4I BMC";
@@ -73,7 +74,8 @@  &uart5 {
 
 &vuart {
 	status = "okay";
-	aspeed,sirq-active-high;
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &mac0 {