diff mbox series

[2/2] drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver

Message ID 20210416092737.1971876-3-narmstrong@baylibre.com (mailing list archive)
State New
Headers show
Series drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver | expand

Commit Message

Neil Armstrong April 16, 2021, 9:27 a.m. UTC
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal
is not connected to a physical pin, leading to confusion when the dw-hdmi cec
controller can't communicate on the bus.

Disable it to avoid exposing a non-functinal bus.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index aad75a22dc33..2ed87cfdd735 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -1103,6 +1103,7 @@  static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
 	dw_plat_data->phy_data = meson_dw_hdmi;
 	dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
 	dw_plat_data->ycbcr_420_allowed = true;
+	dw_plat_data->disable_cec = true;
 
 	if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
 	    dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||