diff mbox series

[1/2] arm64: dts: imx8mm-beacon: Enable more audio

Message ID 20210505191126.1239309-1-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: imx8mm-beacon: Enable more audio | expand

Commit Message

Adam Ford May 5, 2021, 7:11 p.m. UTC 
There are audio ports for SPDIF and MICFIL on the baseboard.
Enable them.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Adam Ford May 6, 2021, 10:44 a.m. UTC | #1 
On Wed, May 5, 2021 at 2:11 PM Adam Ford <aford173@gmail.com> wrote:
>
> There are audio ports for SPDIF and MICFIL on the baseboard.
> Enable them.
>

Sorry for the noise,  I copied these bindings from NXP's 5.10 branch,
but I didn't realize that fsl,imx-audio-micfil doesn't exist upstream.
I'm going to see if a simple audio driver will work.  Either way, I'll
NAK my own work and submit a V2 later.

adam
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> index 6f5e63696ec0..3039a030f3d8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
> @@ -65,6 +65,20 @@ sound {
>                         "AMIC", "MICBIAS",
>                         "IN3R", "AMIC";
>         };
> +
> +       sound-micfil {
> +               compatible = "fsl,imx-audio-micfil";
> +               model = "imx-audio-micfil";
> +               cpu-dai = <&micfil>;
> +       };
> +
> +       sound-spdif {
> +               compatible = "fsl,imx-audio-spdif";
> +               model = "imx-spdif";
> +               spdif-controller = <&spdif1>;
> +               spdif-out;
> +               spdif-in;
> +       };
>  };
>
>  &ecspi2 {
> @@ -141,6 +155,15 @@ pca6416_1: gpio@21 {
>         };
>  };
>
> +&micfil {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_micfil>;
> +       assigned-clocks = <&clk IMX8MM_CLK_PDM>;
> +       assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +       assigned-clock-rates = <196608000>;
> +       status = "okay";
> +};
> +
>  &sai3 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_sai3>;
> @@ -155,6 +178,23 @@ &snvs_pwrkey {
>         status = "okay";
>  };
>
> +&spdif1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_spdif1>;
> +       assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
> +       assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +       assigned-clock-rates = <24576000>;
> +       clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
> +               <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
> +               <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
> +       clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
> +               "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
> +       status = "okay";
> +};
> +
>  &uart2 { /* console */
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_uart2>;
> @@ -209,6 +249,13 @@ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28  0x41
>                 >;
>         };
>
> +       pinctrl_micfil: micfilgrp {
> +               fsl,pins = <
> +                       MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
> +                       MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
> +               >;
> +       };
> +
>         pinctrl_pcal6414: pcal6414-gpiogrp {
>                 fsl,pins = <
>                         MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27               0x19
> @@ -225,6 +272,14 @@ MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0        0xd6
>                 >;
>         };
>
> +       pinctrl_spdif1: spdif1grp {
> +               fsl,pins = <
> +                       MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT        0xd6
> +                       MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN         0xd6
> +                       MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK       0xd6
> +               >;
> +       };
> +
>         pinctrl_uart2: uart2grp {
>                 fsl,pins = <
>                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 6f5e63696ec0..3039a030f3d8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -65,6 +65,20 @@  sound {
 			"AMIC", "MICBIAS",
 			"IN3R", "AMIC";
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-micfil";
+		model = "imx-audio-micfil";
+		cpu-dai = <&micfil>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
 };
 
 &ecspi2 {
@@ -141,6 +155,15 @@  pca6416_1: gpio@21 {
 	};
 };
 
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_micfil>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -155,6 +178,23 @@  &snvs_pwrkey {
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -209,6 +249,13 @@  MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
 		>;
 	};
 
+	pinctrl_micfil: micfilgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_pcal6414: pcal6414-gpiogrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
@@ -225,6 +272,14 @@  MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK	0xd6
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140