| Message ID | 20210603221758.10305-8-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add new Renesas RZ/G2L SoC and Renesas RZ/G2L SMARC EVK support | expand |
Hi Prabhakar, On Fri, Jun 4, 2021 at 12:18 AM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Document the device tree bindings of the Renesas RZ/G2L SoC clock > driver in Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> > Acked-by: Rob Herring <robh@kernel.org> IIRC, Rob gave his R-b, not his A-b. > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode > + > +maintainers: > + - Geert Uytterhoeven <geert+renesas@glider.be> > + > +description: | > + On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module > + Standby Mode share the same register block. > + > + They provide the following functionalities: > + - The CPG block generates various core clocks, > + - The Module Standby Mode block provides two functions: > + 1. Module Stop, providing a Clock Domain to control the clock supply > + to individual SoC devices, > + 2. Reset Control, to perform a software reset of individual SoC devices. > + > +properties: > + compatible: > + const: renesas,r9a07g044-cpg # RZ/G2{L,LC,UL} Shouldn't RZ/G2UL use renesas,r9a07g043-cpg? > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: extal > + > + '#clock-cells': > + description: | > + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" > + and a core clock reference, as defined in > + <dt-bindings/clock/r9a07g044l-cpg.h> r9a07g044-cpg.h > + - For module clocks, the two clock specifier cells must be "CPG_MOD" and > + a module number, as defined in the <dt-bindings/clock/r9a07g044l-cpg.h>. r9a07g044-cpg.h > + const: 2 > + > + '#power-domain-cells': > + description: > + SoC devices that are part of the CPG/Module Standby Mode Clock Domain and > + can be power-managed through Module Stop should refer to the CPG device Module Standby > + node in their "power-domains" property, as documented by the generic PM > + Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. > + const: 0 > + > + '#reset-cells': > + description: > + The single reset specifier cell must be the module number, as defined in > + the <dt-bindings/clock/r9a07g044l-cpg.h>. r9a07g044-cpg.h Gr{oetje,eeting}s, Geert
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml new file mode 100644 index 000000000000..fe32d4daac32 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. + + They provide the following functionalities: + - The CPG block generates various core clocks, + - The Module Standby Mode block provides two functions: + 1. Module Stop, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +properties: + compatible: + const: renesas,r9a07g044-cpg # RZ/G2{L,LC,UL} + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: extal + + '#clock-cells': + description: | + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/r9a07g044l-cpg.h> + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the <dt-bindings/clock/r9a07g044l-cpg.h>. + const: 2 + + '#power-domain-cells': + description: + SoC devices that are part of the CPG/Module Standby Mode Clock Domain and + can be power-managed through Module Stop should refer to the CPG device + node in their "power-domains" property, as documented by the generic PM + Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml. + const: 0 + + '#reset-cells': + description: + The single reset specifier cell must be the module number, as defined in + the <dt-bindings/clock/r9a07g044l-cpg.h>. + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0x11010000 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + };