[10/10] clk: imx: scu: Do not enable runtime PM for CPU clks

Commit Message

Dong Aisheng June 4, 2021, 9:09 a.m. UTC

From: Nitin Garg <[e-mail]>

Since CPU clocks are managed by CPUFREQ and ATF, do not enable
runtime PM otherwise rpm gets out of status as cpufreq
also manages clock states.

Signed-off-by: Nitin Garg <[e-mail]>
Signed-off-by: Dong Aisheng <[e-mail]>
---
 drivers/clk/imx/clk-scu.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index 597cd2754370..083da31dc3ea 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -521,16 +521,19 @@  static int imx_clk_scu_probe(struct platform_device *pdev)
 	struct clk_hw *hw;
 	int ret;
 
-	pm_runtime_set_suspended(dev);
-	pm_runtime_set_autosuspend_delay(dev, 50);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_enable(dev);
-
-	ret = pm_runtime_get_sync(dev);
-	if (ret) {
-		pm_genpd_remove_device(dev);
-		pm_runtime_disable(dev);
-		return ret;
+	if (!((clk->rsrc == IMX_SC_R_A35) || (clk->rsrc == IMX_SC_R_A53) ||
+	    (clk->rsrc == IMX_SC_R_A72))) {
+		pm_runtime_set_suspended(dev);
+		pm_runtime_set_autosuspend_delay(dev, 50);
+		pm_runtime_use_autosuspend(&pdev->dev);
+		pm_runtime_enable(dev);
+
+		ret = pm_runtime_get_sync(dev);
+		if (ret) {
+			pm_genpd_remove_device(dev);
+			pm_runtime_disable(dev);
+			return ret;
+		}
 	}
 
 	hw = __imx_clk_scu(dev, clk->name, clk->parents, clk->num_parents,
@@ -543,8 +546,11 @@  static int imx_clk_scu_probe(struct platform_device *pdev)
 	clk->hw = hw;
 	list_add_tail(&clk->node, &imx_scu_clks[clk->rsrc]);
 
-	pm_runtime_mark_last_busy(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
+	if (!((clk->rsrc == IMX_SC_R_A35) || (clk->rsrc == IMX_SC_R_A53) ||
+	    (clk->rsrc == IMX_SC_R_A72))) {
+		pm_runtime_mark_last_busy(&pdev->dev);
+		pm_runtime_put_autosuspend(&pdev->dev);
+	}
 
 	dev_dbg(dev, "register SCU clock rsrc:%d type:%d\n", clk->rsrc,
 		clk->clk_type);