diff mbox series

[v3,3/6] ARM: config: multi v7: Add renamed symbols

Message ID 20210615011435.518115-4-joel@jms.id.au (mailing list archive)
State New, archived
Headers show
Series ARM: config: Refresh multi v7 | expand

Commit Message

Joel Stanley June 15, 2021, 1:14 a.m. UTC
These options were renamed in recent times. Add the new name so the
driver is built again, and drop the old name.

POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d62054 ("PM: AVS:
smartreflex Move driver to soc specific drivers"). Add the new symbol.

QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8eee ("cpuidle: Convert
Qualcomm SPM driver to a generic CPUidle driver").

SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba78f ("ASoC:
mmp-sspa: Add Device Tree support"). Enable that instead.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/configs/multi_v7_defconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f323004ef0b8..7312413e0594 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -116,6 +116,7 @@  CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
+CONFIG_ARM_QCOM_SPM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_ARM_SCMI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
@@ -467,7 +468,6 @@  CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
 CONFIG_GPIO_MXC=y
-CONFIG_POWER_AVS=y
 CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
@@ -726,8 +726,8 @@  CONFIG_SND_ATMEL_SOC_PDMIC=m
 CONFIG_SND_ATMEL_SOC_I2S=m
 CONFIG_SND_BCM2835_SOC_I2S=m
 CONFIG_SND_SOC_FSL_SAI=m
-CONFIG_SND_MMP_SOC=y
 CONFIG_SND_PXA_SOC_SSP=m
+CONFIG_SND_MMP_SOC_SSPA=m
 CONFIG_SND_PXA910_SOC=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
@@ -984,7 +984,6 @@  CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMD_RPM=m
 CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_ARCH_EMEV2=y