diff mbox series

[v8,4/5] dt-bindings: firmware: Remove xlnx, zynqmp-firmware.txt file

Message ID 20210626155248.5004-5-nava.manne@xilinx.com (mailing list archive)
State New, archived
Headers show
Series Add Bitstream configuration support for Versal | expand

Commit Message

Nava kishore Manne June 26, 2021, 3:52 p.m. UTC
The funtionality of xlnx,zynqmp-firmware.txt is replaced with
xlnx,zynqmp-firmware.yaml bindings so this patch removes the
zynqmp-firmware.txt file

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v8:
              -Removed xlnx,zynqmp-firmware.txt as suggested by rob.

 .../firmware/xilinx/xlnx,zynqmp-firmware.txt  | 44 -------------------
 1 file changed, 44 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt

Comments

Tom Rix July 6, 2021, 9:09 p.m. UTC | #1
On 6/26/21 8:52 AM, Nava kishore Manne wrote:
> The funtionality of xlnx,zynqmp-firmware.txt is replaced with

functionality

Tom

> xlnx,zynqmp-firmware.yaml bindings so this patch removes the
> zynqmp-firmware.txt file
>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v8:
>                -Removed xlnx,zynqmp-firmware.txt as suggested by rob.
>
>   .../firmware/xilinx/xlnx,zynqmp-firmware.txt  | 44 -------------------
>   1 file changed, 44 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
>
> diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> deleted file mode 100644
> index 18c3aea90df2..000000000000
> --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> +++ /dev/null
> @@ -1,44 +0,0 @@
> ------------------------------------------------------------------
> -Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
> ------------------------------------------------------------------
> -
> -The zynqmp-firmware node describes the interface to platform firmware.
> -ZynqMP has an interface to communicate with secure firmware. Firmware
> -driver provides an interface to firmware APIs. Interface APIs can be
> -used by any driver to communicate to PMUFW(Platform Management Unit).
> -These requests include clock management, pin control, device control,
> -power management service, FPGA service and other platform management
> -services.
> -
> -Required properties:
> - - compatible:	Must contain any of below:
> -		"xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
> -		"xlnx,versal-firmware" for Versal
> - - method:	The method of calling the PM-API firmware layer.
> -		Permitted values are:
> -		  - "smc" : SMC #0, following the SMCCC
> -		  - "hvc" : HVC #0, following the SMCCC
> -
> --------
> -Example
> --------
> -
> -Zynq Ultrascale+ MPSoC
> -----------------------
> -firmware {
> -	zynqmp_firmware: zynqmp-firmware {
> -		compatible = "xlnx,zynqmp-firmware";
> -		method = "smc";
> -		...
> -	};
> -};
> -
> -Versal
> -------
> -firmware {
> -	versal_firmware: versal-firmware {
> -		compatible = "xlnx,versal-firmware";
> -		method = "smc";
> -		...
> -	};
> -};
Nava kishore Manne July 8, 2021, 11:42 a.m. UTC | #2
Hi Tom, 

	Please find my response inline.

> -----Original Message-----
> From: Tom Rix <trix@redhat.com>
> Sent: Wednesday, July 7, 2021 2:39 AM
> To: Nava kishore Manne <navam@xilinx.com>; robh+dt@kernel.org; Michal
> Simek <michals@xilinx.com>; mdf@kernel.org; arnd@arndb.de; Rajan Vaja
> <RAJANV@xilinx.com>; gregkh@linuxfoundation.org; Amit Sunil Dhamne
> <amitsuni@xlnx.xilinx.com>; Tejas Patel <tejasp@xlnx.xilinx.com>;
> zou_wei@huawei.com; Sai Krishna Potthuri <lakshmis@xilinx.com>; Ravi
> Patel <ravipate@xlnx.xilinx.com>; iwamatsu@nigauri.org; Jiaying Liang
> <jliang@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org; linux-
> fpga@vger.kernel.org; git <git@xilinx.com>; chinnikishore369@gmail.com
> Subject: Re: [PATCH v8 4/5] dt-bindings: firmware: Remove xlnx,zynqmp-
> firmware.txt file
> 
> 
> On 6/26/21 8:52 AM, Nava kishore Manne wrote:
> > The funtionality of xlnx,zynqmp-firmware.txt is replaced with
> 
> functionality
> 

Will fix

Regards,
Navakishore.
Rob Herring (Arm) July 13, 2021, 10:16 p.m. UTC | #3
On Sat, 26 Jun 2021 21:22:47 +0530, Nava kishore Manne wrote:
> The funtionality of xlnx,zynqmp-firmware.txt is replaced with
> xlnx,zynqmp-firmware.yaml bindings so this patch removes the
> zynqmp-firmware.txt file
> 
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v8:
>               -Removed xlnx,zynqmp-firmware.txt as suggested by rob.
> 
>  .../firmware/xilinx/xlnx,zynqmp-firmware.txt  | 44 -------------------
>  1 file changed, 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
deleted file mode 100644
index 18c3aea90df2..000000000000
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ /dev/null
@@ -1,44 +0,0 @@ 
------------------------------------------------------------------
-Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
------------------------------------------------------------------
-
-The zynqmp-firmware node describes the interface to platform firmware.
-ZynqMP has an interface to communicate with secure firmware. Firmware
-driver provides an interface to firmware APIs. Interface APIs can be
-used by any driver to communicate to PMUFW(Platform Management Unit).
-These requests include clock management, pin control, device control,
-power management service, FPGA service and other platform management
-services.
-
-Required properties:
- - compatible:	Must contain any of below:
-		"xlnx,zynqmp-firmware" for Zynq Ultrascale+ MPSoC
-		"xlnx,versal-firmware" for Versal
- - method:	The method of calling the PM-API firmware layer.
-		Permitted values are:
-		  - "smc" : SMC #0, following the SMCCC
-		  - "hvc" : HVC #0, following the SMCCC
-
--------
-Example
--------
-
-Zynq Ultrascale+ MPSoC
-----------------------
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-		...
-	};
-};
-
-Versal
-------
-firmware {
-	versal_firmware: versal-firmware {
-		compatible = "xlnx,versal-firmware";
-		method = "smc";
-		...
-	};
-};