diff mbox series

[RESEND,3/3] arm64: dts: mediatek: mt8173: Add domain supply for mfg_async

Message ID 20210701114012.RESEND.3.I9e27871bb700c807a564957302b292e9935dae0b@changeid (mailing list archive)
State New, archived
Headers show
Series [RESEND,1/3] soc: mediatek: pm-domains: Use correct mask for bus_prot_clr | expand

Commit Message

Enric Balletbo i Serra July 1, 2021, 9:40 a.m. UTC 
From: Bilal Wasim <Bilal.Wasim@imgtec.com>

da9211 regulator needs to be enabled before enabling the mfg_async power
domain. Otherwise the subdomain is not enabled and causes failure in
imgtec gpu driver boot.

Add the "domain-supply" property to the "mfg_async" node in DT.

Signed-off-by: Bilal Wasim <Bilal.Wasim@imgtec.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts  | 4 ++++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi     | 2 +-
 3 files changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 21452c51a20a..a8efff2071bf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -157,6 +157,10 @@  hdmi_connector_in: endpoint {
 	};
 };
 
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
 &cec {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f6a1738dfbaa..4fa1e93302c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -62,6 +62,10 @@  usb_p0_vbus: regulator@1 {
 	};
 };
 
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
 &cec {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 003a5653c505..dbda5d656b29 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -504,7 +504,7 @@  power-domain@MT8173_POWER_DOMAIN_USB {
 					reg = <MT8173_POWER_DOMAIN_USB>;
 					#power-domain-cells = <0>;
 				};
-				power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+				mfg_async: power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
 					reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
 					clocks = <&clk26m>;
 					clock-names = "mfg";