| Message ID | 20210708124612.30742-6-kostap@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | DTS updates for Marvell Armada CN913x platforms | expand |
On Thu, Jul 08, 2021 at 03:46:12PM +0300, kostap@marvell.com wrote: > From: Konstantin Porotchkin <kostap@marvell.com> > > Change all 10G port modes in Armada family device trees from > 10gbase-kr to 10gbase-r > > Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> > Suggested-by: Russell King <linux@armlinux.org.uk> Please change the "suggested-by" to: Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 51f3e2907597..cd326fe224ce 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -282,7 +282,7 @@ &cp0_eth0 { status = "okay"; /* Network PHY */ - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index e39e1efc95b6..f2e8e0df8865 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -195,7 +195,7 @@ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; @@ -348,7 +348,7 @@ &cp1_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; fixed-link { speed = <10000>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 75933477324a..9f0efcdacdf1 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -202,7 +202,7 @@ &cp0_eth0 { /* This port is connected to 88E6393X switch */ status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; managed = "in-band-status"; phys = <&cp0_comphy4 0>; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 39fc90716454..2cd4bb09e8ff 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -126,7 +126,7 @@ /* SLM-1521-V2, CON9 */ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy4 0>; managed = "in-band-status"; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi index daddab638fb8..f995b1bcda01 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi @@ -85,7 +85,7 @@ /* CON50 */ &cp1_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp1_comphy4 0>; managed = "in-band-status"; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi index 5948de6b4638..3f1795fb4fe7 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi @@ -103,7 +103,7 @@ /* SLM-1521-V2, CON9 */ &cp2_eth0 { status = "disabled"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; /* Generic PHY, providing serdes lanes */ phys = <&cp2_comphy4 0>; managed = "in-band-status";