diff mbox series

[V6,02/15] ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY

Message ID 20210714210713.9015-2-cniedermaier@dh-electronics.com (mailing list archive)
State New, archived
Headers show
Series [V6,01/15] ARM: dts: imx6q-dhcom: Add the parallel system bus | expand

Commit Message

Christoph Niedermaier July 14, 2021, 9:07 p.m. UTC 
Enable the interrupt mode for the ethernet PHY by adding the
necessary property and a separate pinctrl for the PHY. Also
add the compatible property for it.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
---
V2: - Rebase on Shawn Guos branch for-next
V3: - Add Reviewed-by tag
V4: - No changes
V5: - No changes
V6: - Rebase on 5.14-rc1
---
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Shawn Guo July 23, 2021, 3:59 a.m. UTC | #1 
On Wed, Jul 14, 2021 at 11:07:00PM +0200, Christoph Niedermaier wrote:
> Enable the interrupt mode for the ethernet PHY by adding the
> necessary property and a separate pinctrl for the PHY. Also
> add the compatible property for it.
> 
> Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Reviewed-by: Marek Vasut <marex@denx.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: kernel@dh-electronics.com
> To: linux-arm-kernel@lists.infradead.org

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 921a695b79fb..0b318d42fe71 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -124,8 +124,13 @@ 
 		#size-cells = <0>;
 
 		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
-			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 			max-speed = <100>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
@@ -299,8 +304,6 @@ 
 			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
 		>;
 	};
 
@@ -310,6 +313,13 @@ 
 		>;
 	};
 
+	pinctrl_ethphy0: ethphy0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0