diff mbox series

[net-next,V1,2/3] dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml

Message ID 20210719071821.31583-3-qiangqing.zhang@nxp.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: net: dwmac-imx: convert | expand

Commit Message

Joakim Zhang July 19, 2021, 7:18 a.m. UTC
In order to automate the verification of DT nodes covert imx-dwmac to
nxp,dwmac-imx.yaml, and pass below checking.

$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 .../devicetree/bindings/net/imx-dwmac.txt     | 56 -----------
 .../bindings/net/nxp,dwmac-imx.yaml           | 93 +++++++++++++++++++
 2 files changed, 93 insertions(+), 56 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt
 create mode 100644 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

Comments

Rob Herring (Arm) July 21, 2021, 4:53 p.m. UTC | #1
On Mon, Jul 19, 2021 at 03:18:20PM +0800, Joakim Zhang wrote:
> In order to automate the verification of DT nodes covert imx-dwmac to
> nxp,dwmac-imx.yaml, and pass below checking.
> 
> $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  .../devicetree/bindings/net/imx-dwmac.txt     | 56 -----------
>  .../bindings/net/nxp,dwmac-imx.yaml           | 93 +++++++++++++++++++
>  2 files changed, 93 insertions(+), 56 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt
> deleted file mode 100644
> index 921d522fe8d7..000000000000
> --- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
> -
> -This file documents platform glue layer for IMX.
> -Please see stmmac.txt for the other unchanged properties.
> -
> -The device node has following properties.
> -
> -Required properties:
> -- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
> -	       and "snps,dwmac-5.10a" to select IP version.
> -- clocks: Must contain a phandle for each entry in clock-names.
> -- clock-names: Should be "stmmaceth" for the host clock.
> -	       Should be "pclk" for the MAC apb clock.
> -	       Should be "ptp_ref" for the MAC timer clock.
> -	       Should be "tx" for the MAC RGMII TX clock:
> -	       Should be "mem" for EQOS MEM clock.
> -		- "mem" clock is required for imx8dxl platform.
> -		- "mem" clock is not required for imx8mp platform.
> -- interrupt-names: Should contain a list of interrupt names corresponding to
> -		   the interrupts in the interrupts property, if available.
> -		   Should be "macirq" for the main MAC IRQ
> -		   Should be "eth_wake_irq" for the IT which wake up system
> -- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
> -	     encompases the GPR register, and the offset of the GPR register.
> -		- required for imx8mp platform.
> -		- is optional for imx8dxl platform.
> -
> -Optional properties:
> -- intf_mode: is optional for imx8dxl platform.
> -- snps,rmii_refclk_ext: to select RMII reference clock from external.
> -
> -Example:
> -	eqos: ethernet@30bf0000 {
> -		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
> -		reg = <0x30bf0000 0x10000>;
> -		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> -			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> -		interrupt-names = "eth_wake_irq", "macirq";
> -		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> -			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> -			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> -			 <&clk IMX8MP_CLK_ENET_QOS>;
> -		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> -		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
> -				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> -				  <&clk IMX8MP_CLK_ENET_QOS>;
> -		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
> -					 <&clk IMX8MP_SYS_PLL2_100M>,
> -					 <&clk IMX8MP_SYS_PLL2_125M>;
> -		assigned-clock-rates = <0>, <100000000>, <125000000>;
> -		nvmem-cells = <&eth_mac0>;
> -		nvmem-cell-names = "mac-address";
> -		nvmem_macaddr_swap;
> -		intf_mode = <&gpr 0x4>;
> -		status = "disabled";
> -	};
> diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> new file mode 100644
> index 000000000000..5629b2e4ccf8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
> +
> +maintainers:
> +  - Joakim Zhang <qiangqing.zhang@nxp.com>
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - nxp,imx8mp-dwmac-eqos
> +          - nxp,imx8dxl-dwmac-eqos
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: "snps,dwmac.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

Don't need 'oneOf' as there is only one entry.

> +          - enum:
> +              - nxp,imx8mp-dwmac-eqos
> +              - nxp,imx8dxl-dwmac-eqos
> +          - const: snps,dwmac-5.10a
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 5
> +    items:
> +      - description: MAC host clock
> +      - description: MAC apb clock
> +      - description: MAC timer clock
> +      - description: MAC RGMII TX clock
> +      - description: EQOS MEM clock
> +
> +  clock-names:
> +    minItems: 3
> +    maxItems: 5
> +    contains:

s/contains/items/

But really, like the other one, can't you define the order?

> +      enum:
> +        - stmmaceth
> +        - pclk
> +        - ptp_ref
> +        - tx
> +        - mem
> +
> +  intf_mode:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Should be phandle/offset pair. The phandle to the syscon node which
> +      encompases the GPR register, and the offset of the GPR register.

Sounds like 2 cells:

maxItems: 2

> +
> +  snps,rmii_refclk_ext:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      To select RMII reference clock from external.
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    eqos: ethernet@30bf0000 {
> +            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
> +            reg = <0x30bf0000 0x10000>;
> +            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "macirq", "eth_wake_irq";
> +            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> +                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> +                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> +                     <&clk IMX8MP_CLK_ENET_QOS>;
> +            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> +            phy-mode = "rgmii";
> +            status = "disabled";

Why are you disabling your example? Drop.

> +    };
> -- 
> 2.17.1
> 
>
Joakim Zhang July 22, 2021, 10:36 a.m. UTC | #2
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 2021年7月22日 0:53
> To: Joakim Zhang <qiangqing.zhang@nxp.com>
> Cc: davem@davemloft.net; kuba@kernel.org; shawnguo@kernel.org;
> s.hauer@pengutronix.de; festevam@gmail.com; kernel@pengutronix.de;
> dl-linux-imx <linux-imx@nxp.com>; peppe.cavallaro@st.com;
> joabreu@synopsys.com; netdev@vger.kernel.org; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH net-next V1 2/3] dt-bindings: net: imx-dwmac: convert
> imx-dwmac bindings to yaml
> 
> On Mon, Jul 19, 2021 at 03:18:20PM +0800, Joakim Zhang wrote:
> > In order to automate the verification of DT nodes covert imx-dwmac to
> > nxp,dwmac-imx.yaml, and pass below checking.
> >
> > $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check
> >
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.y
> a
> > ml $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check
> >
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.y
> a
> > ml
> >
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> > ---
> >  .../devicetree/bindings/net/imx-dwmac.txt     | 56 -----------
> >  .../bindings/net/nxp,dwmac-imx.yaml           | 93
> +++++++++++++++++++
> >  2 files changed, 93 insertions(+), 56 deletions(-)  delete mode
> > 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt
> > b/Documentation/devicetree/bindings/net/imx-dwmac.txt
> > deleted file mode 100644
> > index 921d522fe8d7..000000000000
> > --- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
> > +++ /dev/null
> > @@ -1,56 +0,0 @@
> > -IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a
> IP.
> > -
> > -This file documents platform glue layer for IMX.
> > -Please see stmmac.txt for the other unchanged properties.
> > -
> > -The device node has following properties.
> > -
> > -Required properties:
> > -- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
> > -	       and "snps,dwmac-5.10a" to select IP version.
> > -- clocks: Must contain a phandle for each entry in clock-names.
> > -- clock-names: Should be "stmmaceth" for the host clock.
> > -	       Should be "pclk" for the MAC apb clock.
> > -	       Should be "ptp_ref" for the MAC timer clock.
> > -	       Should be "tx" for the MAC RGMII TX clock:
> > -	       Should be "mem" for EQOS MEM clock.
> > -		- "mem" clock is required for imx8dxl platform.
> > -		- "mem" clock is not required for imx8mp platform.
> > -- interrupt-names: Should contain a list of interrupt names corresponding to
> > -		   the interrupts in the interrupts property, if available.
> > -		   Should be "macirq" for the main MAC IRQ
> > -		   Should be "eth_wake_irq" for the IT which wake up system
> > -- intf_mode: Should be phandle/offset pair. The phandle to the syscon node
> which
> > -	     encompases the GPR register, and the offset of the GPR register.
> > -		- required for imx8mp platform.
> > -		- is optional for imx8dxl platform.
> > -
> > -Optional properties:
> > -- intf_mode: is optional for imx8dxl platform.
> > -- snps,rmii_refclk_ext: to select RMII reference clock from external.
> > -
> > -Example:
> > -	eqos: ethernet@30bf0000 {
> > -		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
> > -		reg = <0x30bf0000 0x10000>;
> > -		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> > -			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> > -		interrupt-names = "eth_wake_irq", "macirq";
> > -		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> > -			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> > -			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> > -			 <&clk IMX8MP_CLK_ENET_QOS>;
> > -		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> > -		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
> > -				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> > -				  <&clk IMX8MP_CLK_ENET_QOS>;
> > -		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
> > -					 <&clk IMX8MP_SYS_PLL2_100M>,
> > -					 <&clk IMX8MP_SYS_PLL2_125M>;
> > -		assigned-clock-rates = <0>, <100000000>, <125000000>;
> > -		nvmem-cells = <&eth_mac0>;
> > -		nvmem-cell-names = "mac-address";
> > -		nvmem_macaddr_swap;
> > -		intf_mode = <&gpr 0x4>;
> > -		status = "disabled";
> > -	};
> > diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> > b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> > new file mode 100644
> > index 000000000000..5629b2e4ccf8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fnet%2Fnxp%2Cdwmac-imx.yaml%23&amp;data=0
> 4%7C01
> >
> +%7Cqiangqing.zhang%40nxp.com%7Ce67c2543a57a49a20fa708d94c6802bc
> %7C686
> >
> +ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637624831874124189%7C
> Unknown%
> >
> +7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLCJ
> >
> +XVCI6Mn0%3D%7C1000&amp;sdata=c0oEjThQAMvIOJYp4epHkPJr2rYMJQUb
> D1mccQvs
> > +mCo%3D&amp;reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=04%7C01%7Cqia
> ngqing
> >
> +.zhang%40nxp.com%7Ce67c2543a57a49a20fa708d94c6802bc%7C686ea1d3b
> c2b4c6
> >
> +fa92cd99c5c301635%7C0%7C0%7C637624831874134148%7CUnknown%7CT
> WFpbGZsb3
> >
> +d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0
> %3D%
> >
> +7C1000&amp;sdata=1%2BNhcSiOujYzvNsGnYLwo6PGFHGb3gacVOntovlmGes
> %3D&amp
> > +;reserved=0
> > +
> > +title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
> > +
> > +maintainers:
> > +  - Joakim Zhang <qiangqing.zhang@nxp.com>
> > +
> > +# We need a select here so we don't match all nodes with 'snps,dwmac'
> > +select:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - nxp,imx8mp-dwmac-eqos
> > +          - nxp,imx8dxl-dwmac-eqos
> > +  required:
> > +    - compatible
> > +
> > +allOf:
> > +  - $ref: "snps,dwmac.yaml#"
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> 
> Don't need 'oneOf' as there is only one entry.
OK

> > +          - enum:
> > +              - nxp,imx8mp-dwmac-eqos
> > +              - nxp,imx8dxl-dwmac-eqos
> > +          - const: snps,dwmac-5.10a
> > +
> > +  clocks:
> > +    minItems: 3
> > +    maxItems: 5
> > +    items:
> > +      - description: MAC host clock
> > +      - description: MAC apb clock
> > +      - description: MAC timer clock
> > +      - description: MAC RGMII TX clock
> > +      - description: EQOS MEM clock
> > +
> > +  clock-names:
> > +    minItems: 3
> > +    maxItems: 5
> > +    contains:
> 
> s/contains/items/
> 
> But really, like the other one, can't you define the order?
OK

> > +      enum:
> > +        - stmmaceth
> > +        - pclk
> > +        - ptp_ref
> > +        - tx
> > +        - mem
> > +
> > +  intf_mode:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description:
> > +      Should be phandle/offset pair. The phandle to the syscon node which
> > +      encompases the GPR register, and the offset of the GPR register.
> 
> Sounds like 2 cells:
> 
> maxItems: 2
Why? I think it's only one item like below:

intf_mode = <&gpr 0x4>;

> > +
> > +  snps,rmii_refclk_ext:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> > +    description:
> > +      To select RMII reference clock from external.
> > +
> > +required:
> > +  - compatible
> > +  - clocks
> > +  - clock-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/clock/imx8mp-clock.h>
> > +
> > +    eqos: ethernet@30bf0000 {
> > +            compatible =
> "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
> > +            reg = <0x30bf0000 0x10000>;
> > +            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "macirq", "eth_wake_irq";
> > +            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> > +                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> > +                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> > +                     <&clk IMX8MP_CLK_ENET_QOS>;
> > +            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> > +            phy-mode = "rgmii";
> > +            status = "disabled";
> 
> Why are you disabling your example? Drop.
OK

Will send a follow-up patch to improve this dt-binding later.

Best Regards,
Joakim Zhang
> 
> > +    };
> > --
> > 2.17.1
> >
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt
deleted file mode 100644
index 921d522fe8d7..000000000000
--- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
+++ /dev/null
@@ -1,56 +0,0 @@ 
-IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
-
-This file documents platform glue layer for IMX.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
-	       and "snps,dwmac-5.10a" to select IP version.
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: Should be "stmmaceth" for the host clock.
-	       Should be "pclk" for the MAC apb clock.
-	       Should be "ptp_ref" for the MAC timer clock.
-	       Should be "tx" for the MAC RGMII TX clock:
-	       Should be "mem" for EQOS MEM clock.
-		- "mem" clock is required for imx8dxl platform.
-		- "mem" clock is not required for imx8mp platform.
-- interrupt-names: Should contain a list of interrupt names corresponding to
-		   the interrupts in the interrupts property, if available.
-		   Should be "macirq" for the main MAC IRQ
-		   Should be "eth_wake_irq" for the IT which wake up system
-- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
-	     encompases the GPR register, and the offset of the GPR register.
-		- required for imx8mp platform.
-		- is optional for imx8dxl platform.
-
-Optional properties:
-- intf_mode: is optional for imx8dxl platform.
-- snps,rmii_refclk_ext: to select RMII reference clock from external.
-
-Example:
-	eqos: ethernet@30bf0000 {
-		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
-		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
-		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
-			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
-			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-			 <&clk IMX8MP_CLK_ENET_QOS>;
-		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
-		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
-				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
-				  <&clk IMX8MP_CLK_ENET_QOS>;
-		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
-					 <&clk IMX8MP_SYS_PLL2_100M>,
-					 <&clk IMX8MP_SYS_PLL2_125M>;
-		assigned-clock-rates = <0>, <100000000>, <125000000>;
-		nvmem-cells = <&eth_mac0>;
-		nvmem-cell-names = "mac-address";
-		nvmem_macaddr_swap;
-		intf_mode = <&gpr 0x4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
new file mode 100644
index 000000000000..5629b2e4ccf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -0,0 +1,93 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };