diff mbox series

[v3] arm64: dts: imx8mp: Add dsp node

Message ID 20210723110540.1332145-1-daniel.baluta@oss.nxp.com (mailing list archive)
State New, archived
Headers show
Series [v3] arm64: dts: imx8mp: Add dsp node | expand

Commit Message

Daniel Baluta (OSS) July 23, 2021, 11:05 a.m. UTC 
From: Daniel Baluta <daniel.baluta@nxp.com>

i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a
custom firmware or the open source SOF firmware [1]

DSP device is handled by SOF OF driver found in
sound/soc/sof/sof-of-dev.c

Notice that the DSP node makes use of:
	- dsp_reserved, a reserved memory region for various Audio
	  resources (e.g firmware loading, audio buffers, etc).
	- Messaging Unit (mu2) for passing notifications betweem ARM
	  core and DSP.

[1] https://thesofproject.github.io/latest/platforms/index.html
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
Changes since v2:
	* add new line between dts nodes

Changes since v1:
ยป       * mark MU2 node as disabled, because mu2 clock support is not yet upstream.

 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 30 +++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Comments

Shawn Guo July 26, 2021, 1:24 a.m. UTC | #1 
On Fri, Jul 23, 2021 at 02:05:40PM +0300, Daniel Baluta wrote:
> From: Daniel Baluta <daniel.baluta@nxp.com>
> 
> i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a
> custom firmware or the open source SOF firmware [1]
> 
> DSP device is handled by SOF OF driver found in
> sound/soc/sof/sof-of-dev.c
> 
> Notice that the DSP node makes use of:
> 	- dsp_reserved, a reserved memory region for various Audio
> 	  resources (e.g firmware loading, audio buffers, etc).
> 	- Messaging Unit (mu2) for passing notifications betweem ARM
> 	  core and DSP.
> 
> [1] https://thesofproject.github.io/latest/platforms/index.html
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 9f7c7f587d38..2a1a4ff36c67 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -135,6 +135,17 @@  clk_ext4: clock-ext4 {
 		clock-output-names = "clk_ext4";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7
@@ -698,6 +709,14 @@  mu: mailbox@30aa0000 {
 				#mbox-cells = <2>;
 			};
 
+			mu2: mailbox@30e60000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30e60000 0x10000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -938,5 +957,16 @@  usb_dwc3_1: usb@38200000 {
 				snps,dis-u2-freeclk-exists-quirk;
 			};
 		};
+
+		dsp: dsp@3b6e8000 {
+			compatible = "fsl,imx8mp-dsp";
+			reg = <0x3b6e8000 0x88000>;
+			mbox-names = "txdb0", "txdb1",
+				"rxdb0", "rxdb1";
+			mboxes = <&mu2 2 0>, <&mu2 2 1>,
+				<&mu2 3 0>, <&mu2 3 1>;
+			memory-region = <&dsp_reserved>;
+			status = "disabled";
+		};
 	};
 };