deleted file mode 100644
@@ -1,50 +0,0 @@
-* Samsung Exynos Interrupt Combiner Controller
-
-Samsung's Exynos4 architecture includes a interrupt combiner controller which
-can combine interrupt sources as a group and provide a single interrupt request
-for the group. The interrupt request from each group are connected to a parent
-interrupt controller, such as GIC in case of Exynos4210.
-
-The interrupt combiner controller consists of multiple combiners. Up to eight
-interrupt sources can be connected to a combiner. The combiner outputs one
-combined interrupt for its eight interrupt sources. The combined interrupt
-is usually connected to a parent interrupt controller.
-
-A single node in the device tree is used to describe the interrupt combiner
-controller module (which includes multiple combiners). A combiner in the
-interrupt controller module shares config/control registers with other
-combiners. For example, a 32-bit interrupt enable/disable config register
-can accommodate up to 4 interrupt combiners (with each combiner supporting
-up to 8 interrupt sources).
-
-Required properties:
-- compatible: should be "samsung,exynos4210-combiner".
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: should be <2>. The meaning of the cells are
- * First Cell: Combiner Group Number.
- * Second Cell: Interrupt number within the group.
-- reg: Base address and size of interrupt combiner registers.
-- interrupts: The list of interrupts generated by the combiners which are then
- connected to a parent interrupt controller. The format of the interrupt
- specifier depends in the interrupt parent controller.
-
-Optional properties:
-- samsung,combiner-nr: The number of interrupt combiners supported. If this
- property is not specified, the default number of combiners is assumed
- to be 16.
-
-
-Example:
-
- The following is a an example from the Exynos4210 SoC dtsi file.
-
- combiner:interrupt-controller@10440000 {
- compatible = "samsung,exynos4210-combiner";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
- };
new file mode 100644
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Interrupt Combiner Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ Samsung's Exynos4 architecture includes a interrupt combiner controller which
+ can combine interrupt sources as a group and provide a single interrupt
+ request for the group. The interrupt request from each group are connected to
+ a parent interrupt controller, such as GIC in case of Exynos4210.
+
+ The interrupt combiner controller consists of multiple combiners. Up to eight
+ interrupt sources can be connected to a combiner. The combiner outputs one
+ combined interrupt for its eight interrupt sources. The combined interrupt is
+ usually connected to a parent interrupt controller.
+
+ A single node in the device tree is used to describe the interrupt combiner
+ controller module (which includes multiple combiners). A combiner in the
+ interrupt controller module shares config/control registers with other
+ combiners. For example, a 32-bit interrupt enable/disable config register can
+ accommodate up to 4 interrupt combiners (with each combiner supporting up to
+ 8 interrupt sources).
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: samsung,exynos4210-combiner
+
+ interrupt-controller: true
+
+ interrupts:
+ minItems: 8
+ maxItems: 32
+
+ "#interrupt-cells":
+ description: |
+ The meaning of the cells are:
+ * First Cell: Combiner Group Number.
+ * Second Cell: Interrupt number within the group.
+ const: 2
+
+ reg:
+ maxItems: 1
+
+ samsung,combiner-nr:
+ description: |
+ The number of interrupt combiners supported. Should match number
+ of interrupts set in "interrupts" property.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 8
+ maximum: 32
+ default: 16
+
+required:
+ - compatible
+ - interrupt-controller
+ - interrupts
+ - "#interrupt-cells"
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
Convert Samsung Exynos SoC Interrupt Combiner Controller bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../samsung,exynos4210-combiner.txt | 50 ---------- .../samsung,exynos4210-combiner.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml