diff mbox series

i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA

Message ID 20210826174632.91887-1-t.schramm@manjaro.org (mailing list archive)
State New, archived
Headers show
Series i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA | expand

Commit Message

Tobias Schramm Aug. 26, 2021, 5:46 p.m. UTC
Previously the SDA line sometimes remained stuck low after timeouts
rendering the I2C bus unusable. Testing has shown that disabling and
reenabling the I2C peripheral after sending the stop condition seems to
unstick SDA reliably.
Disable and reenable the I2C controller on timeout after sending stop
condition to unstick SDA.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 drivers/i2c/busses/i2c-rk3x.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

John Keeping Nov. 18, 2021, 6:35 p.m. UTC | #1
On Thu, Aug 26, 2021 at 07:46:32PM +0200, Tobias Schramm wrote:
> Previously the SDA line sometimes remained stuck low after timeouts
> rendering the I2C bus unusable. Testing has shown that disabling and
> reenabling the I2C peripheral after sending the stop condition seems to
> unstick SDA reliably.
> Disable and reenable the I2C controller on timeout after sending stop
> condition to unstick SDA.
> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>

I haven't seen the issue described here, so I can't test whether this
fix works, but the explanation makes sense, so:

Reviewed-by: John Keeping <john@metanate.com>

> ---
>  drivers/i2c/busses/i2c-rk3x.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 819ab4ee517e..fc330cc3686a 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1108,6 +1108,16 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
>  			val |= REG_CON_EN | REG_CON_STOP;
>  			i2c_writel(i2c, val, REG_CON);
>  
> +			/*
> +			 * Sometimes SDA remains stuck low after timeouts.
> +			 * Disable and reenable the I2C peripheral to unstick
> +			 * SDA.
> +			 */
> +			val &= ~REG_CON_EN;
> +			i2c_writel(i2c, val, REG_CON);
> +			val |= REG_CON_EN;
> +			i2c_writel(i2c, val, REG_CON);
> +
>  			i2c->state = STATE_IDLE;
>  
>  			ret = -ETIMEDOUT;
Wolfram Sang Nov. 29, 2021, 10:44 a.m. UTC | #2
On Thu, Aug 26, 2021 at 07:46:32PM +0200, Tobias Schramm wrote:
> Previously the SDA line sometimes remained stuck low after timeouts
> rendering the I2C bus unusable. Testing has shown that disabling and
> reenabling the I2C peripheral after sending the stop condition seems to
> unstick SDA reliably.
> Disable and reenable the I2C controller on timeout after sending stop
> condition to unstick SDA.

Does it also help to not send STOP? This looks a bit like a hack which
went into the driver somehow. The proper solution might be to remove the
STOP and add proper i2c_bus_recovery at the beginning of a transfer.

> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
> ---
>  drivers/i2c/busses/i2c-rk3x.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
> index 819ab4ee517e..fc330cc3686a 100644
> --- a/drivers/i2c/busses/i2c-rk3x.c
> +++ b/drivers/i2c/busses/i2c-rk3x.c
> @@ -1108,6 +1108,16 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
>  			val |= REG_CON_EN | REG_CON_STOP;
>  			i2c_writel(i2c, val, REG_CON);
>  
> +			/*
> +			 * Sometimes SDA remains stuck low after timeouts.
> +			 * Disable and reenable the I2C peripheral to unstick
> +			 * SDA.
> +			 */
> +			val &= ~REG_CON_EN;
> +			i2c_writel(i2c, val, REG_CON);
> +			val |= REG_CON_EN;
> +			i2c_writel(i2c, val, REG_CON);
> +
>  			i2c->state = STATE_IDLE;
>  
>  			ret = -ETIMEDOUT;
> -- 
> 2.31.1
>
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 819ab4ee517e..fc330cc3686a 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1108,6 +1108,16 @@  static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 			val |= REG_CON_EN | REG_CON_STOP;
 			i2c_writel(i2c, val, REG_CON);
 
+			/*
+			 * Sometimes SDA remains stuck low after timeouts.
+			 * Disable and reenable the I2C peripheral to unstick
+			 * SDA.
+			 */
+			val &= ~REG_CON_EN;
+			i2c_writel(i2c, val, REG_CON);
+			val |= REG_CON_EN;
+			i2c_writel(i2c, val, REG_CON);
+
 			i2c->state = STATE_IDLE;
 
 			ret = -ETIMEDOUT;