new file mode 100644
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+ - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+ • 10-bits resolution for 16 voltage channels.
+ • The device split into two individual engine and each contains 8 voltage
+ channels.
+ • Channel scanning can be non-continuous.
+ • Programmable ADC clock frequency.
+ • Programmable upper and lower threshold for each channels.
+ • Interrupt when larger or less than threshold for each channels.
+ • Support hysteresis for each channels.
+ • Built-in a compensating method.
+ • Built-in a register to trim internal reference voltage.
+ • Internal or External reference voltage.
+ • Support 2 Internal reference voltage 1.2v or 2.5v.
+ • Integrate dividing circuit for battery sensing.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-adc0
+ - aspeed,ast2600-adc1
+ description:
+ Their trimming data, which is used to calibrate internal reference volage,
+ locates in different address of OTP.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Input clock used to derive the sample clock. Expected to be the
+ SoC's APB clock.
+
+ resets:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 1
+
+ vref-supply:
+ description:
+ The external regulator supply ADC reference voltage.
+
+ aspeed,int-vref-microvolt:
+ enum: [1200000, 2500000]
+ description:
+ ADC internal reference voltage in microvolts.
+
+ aspeed,battery-sensing:
+ type: boolean
+ description:
+ Inform the driver that last channel will be used to sensor battery.
+
+ aspeed,trim-data-valid:
+ type: boolean
+ description: |
+ The ADC reference voltage can be calibrated to obtain the trimming
+ data which will be stored in otp. This property informs the driver that
+ the data store in the otp is valid.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ adc0: adc@1e6e9000 {
+ compatible = "aspeed,ast2600-adc0";
+ reg = <0x1e6e9000 0x100>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_ADC>;
+ #io-channel-cells = <1>;
+ aspeed,int-vref-microvolt = <2500000>;
+ };
+ adc1: adc@1e6e9100 {
+ compatible = "aspeed,ast2600-adc1";
+ reg = <0x1e6e9100 0x100>;
+ clocks = <&syscon ASPEED_CLK_APB2>;
+ resets = <&syscon ASPEED_RESET_ADC>;
+ #io-channel-cells = <1>;
+ aspeed,int-vref-microvolt = <2500000>;
+ };
+...
Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml