| Message ID | 20210831071458.2334-6-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for ast2600 ADC | expand |
On Tue, 31 Aug 2021 15:14:48 +0800 Billy Tsai <billy_tsai@aspeedtech.com> wrote: Title. Refactor (refactory isn't a word as far as I know though it perhaps should be ;) If you are rerolling the latter part of this series, merge patch 7 down into this one. If not, it's fine as it stands. That one is trivial and a direct result of this one. Jonathan > This patch refactors the model data structure to distinguish the > function form different versions of aspeed ADC. > - Rename the vref_voltage to vref_fixed_mv and add vref_mv driver data > When driver probe will check vref_fixed_mv value and store it to vref_mv > which isn't const value. > - Add num_channels > Make num_channles of iio device can be changed by different model_data > - Add need_prescaler flag and scaler_bit_width > The need_prescaler flag is used to tell the driver the clock divider needs > another Prescaler and the scaler_bit_width to set the clock divider > bitfield width. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > drivers/iio/adc/aspeed_adc.c | 18 ++++++++++++++---- > 1 file changed, 14 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c > index 76ae1c3f584b..6ce2f676c54a 100644 > --- a/drivers/iio/adc/aspeed_adc.c > +++ b/drivers/iio/adc/aspeed_adc.c > @@ -71,8 +71,11 @@ struct aspeed_adc_model_data { > const char *model_name; > unsigned int min_sampling_rate; // Hz > unsigned int max_sampling_rate; // Hz > - unsigned int vref_voltage; // mV > + unsigned int vref_fixed_mv; > bool wait_init_sequence; > + bool need_prescaler; > + u8 scaler_bit_width; > + unsigned int num_channels; > }; > > struct aspeed_adc_data { > @@ -83,6 +86,7 @@ struct aspeed_adc_data { > struct clk_hw *clk_prescaler; > struct clk_hw *clk_scaler; > struct reset_control *rst; > + int vref_mv; > }; > > #define ASPEED_CHAN(_idx, _data_reg_addr) { \ > @@ -126,7 +130,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev, > return IIO_VAL_INT; > > case IIO_CHAN_INFO_SCALE: > - *val = data->model_data->vref_voltage; > + *val = data->model_data->vref_fixed_mv; > *val2 = ASPEED_RESOLUTION_BITS; > return IIO_VAL_FRACTIONAL_LOG2; > > @@ -320,17 +324,23 @@ static int aspeed_adc_remove(struct platform_device *pdev) > > static const struct aspeed_adc_model_data ast2400_model_data = { > .model_name = "ast2400-adc", > - .vref_voltage = 2500, // mV > + .vref_fixed_mv = 2500, > .min_sampling_rate = 10000, > .max_sampling_rate = 500000, > + .need_prescaler = true, > + .scaler_bit_width = 10, > + .num_channels = 16, > }; > > static const struct aspeed_adc_model_data ast2500_model_data = { > .model_name = "ast2500-adc", > - .vref_voltage = 1800, // mV > + .vref_fixed_mv = 1800, > .min_sampling_rate = 1, > .max_sampling_rate = 1000000, > .wait_init_sequence = true, > + .need_prescaler = true, > + .scaler_bit_width = 10, > + .num_channels = 16, > }; > > static const struct of_device_id aspeed_adc_matches[] = {
diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c index 76ae1c3f584b..6ce2f676c54a 100644 --- a/drivers/iio/adc/aspeed_adc.c +++ b/drivers/iio/adc/aspeed_adc.c @@ -71,8 +71,11 @@ struct aspeed_adc_model_data { const char *model_name; unsigned int min_sampling_rate; // Hz unsigned int max_sampling_rate; // Hz - unsigned int vref_voltage; // mV + unsigned int vref_fixed_mv; bool wait_init_sequence; + bool need_prescaler; + u8 scaler_bit_width; + unsigned int num_channels; }; struct aspeed_adc_data { @@ -83,6 +86,7 @@ struct aspeed_adc_data { struct clk_hw *clk_prescaler; struct clk_hw *clk_scaler; struct reset_control *rst; + int vref_mv; }; #define ASPEED_CHAN(_idx, _data_reg_addr) { \ @@ -126,7 +130,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = data->model_data->vref_voltage; + *val = data->model_data->vref_fixed_mv; *val2 = ASPEED_RESOLUTION_BITS; return IIO_VAL_FRACTIONAL_LOG2; @@ -320,17 +324,23 @@ static int aspeed_adc_remove(struct platform_device *pdev) static const struct aspeed_adc_model_data ast2400_model_data = { .model_name = "ast2400-adc", - .vref_voltage = 2500, // mV + .vref_fixed_mv = 2500, .min_sampling_rate = 10000, .max_sampling_rate = 500000, + .need_prescaler = true, + .scaler_bit_width = 10, + .num_channels = 16, }; static const struct aspeed_adc_model_data ast2500_model_data = { .model_name = "ast2500-adc", - .vref_voltage = 1800, // mV + .vref_fixed_mv = 1800, .min_sampling_rate = 1, .max_sampling_rate = 1000000, .wait_init_sequence = true, + .need_prescaler = true, + .scaler_bit_width = 10, + .num_channels = 16, }; static const struct of_device_id aspeed_adc_matches[] = {
This patch refactors the model data structure to distinguish the function form different versions of aspeed ADC. - Rename the vref_voltage to vref_fixed_mv and add vref_mv driver data When driver probe will check vref_fixed_mv value and store it to vref_mv which isn't const value. - Add num_channels Make num_channles of iio device can be changed by different model_data - Add need_prescaler flag and scaler_bit_width The need_prescaler flag is used to tell the driver the clock divider needs another Prescaler and the scaler_bit_width to set the clock divider bitfield width. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/iio/adc/aspeed_adc.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-)