| Message ID | 20210905192628.206061-1-jernej.skrabec@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm: dts: sunxi: h3/h5: Fix I2S2 node | expand |
Hi all, Dne nedelja, 05. september 2021 ob 21:26:28 CEST je Jernej Skrabec napisal(a): > I2S2 controller has RX DMA channel according to documentation. > Sorry for mistake. This is not true. Documentation doesn't have RX DMA documented (I2S2 is connected to HDMI). Marcus, do you remember if loopback mode actually works on H3, with DMA enabled? Maybe DMA is there, just undocumented. Some SoCs (H6, R40) have RX DMA channel documented, even though it's used for HDMI TX only, and others don't (A64, H3, H5). Anyway, I got report that I2S driver from 5.14 onwards can't register controller anymore due to missing RX DMA channel. So either driver or DT has to be fixed. Please disregard this patch for now. Best regards, Jernej > Add it. > > Fixes: cd7c897821a0 ("arm: dts: sunxi: h3/h5: Add I2S2 node") > Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> > --- > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3- h5.dtsi > index c7428df9469e..bd26f2059220 100644 > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi > @@ -670,9 +670,9 @@ i2s2: i2s@1c22800 { > interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; > clock-names = "apb", "mod"; > - dmas = <&dma 27>; > + dmas = <&dma 27>, <&dma 27>; > resets = <&ccu RST_BUS_I2S2>; > - dma-names = "tx"; > + dma-names = "tx", "rx"; > status = "disabled"; > }; > > -- > 2.33.0 > >
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index c7428df9469e..bd26f2059220 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -670,9 +670,9 @@ i2s2: i2s@1c22800 { interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; clock-names = "apb", "mod"; - dmas = <&dma 27>; + dmas = <&dma 27>, <&dma 27>; resets = <&ccu RST_BUS_I2S2>; - dma-names = "tx"; + dma-names = "tx", "rx"; status = "disabled"; };
I2S2 controller has RX DMA channel according to documentation. Add it. Fixes: cd7c897821a0 ("arm: dts: sunxi: h3/h5: Add I2S2 node") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)