| Message ID | 20210915202259.3000923-1-michael@walle.cc (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: ls1028a: fix eSDHC2 node | expand |
On Wed, Sep 15, 2021 at 10:22:59PM +0200, Michael Walle wrote: > On the LS1028A this instance of the eSDHC controller is intended for > either an eMMC or eSDIO card. It doesn't provide a card detect pin and > its IO voltage is fixed at 1.8V. > > Remove the bogus broken-cd property, instead add the non-removable > property. Fix the voltage-ranges property and set it to 1.8V only. > > Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts") > Signed-off-by: Michael Walle <michael@walle.cc> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index ef771bfad11c..8cee1f79e5c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -407,9 +407,9 @@ esdhc1: mmc@2150000 { interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; /* fixed up by bootloader */ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; - voltage-ranges = <1800 1800 3300 3300>; + voltage-ranges = <1800 1800>; sdhci,auto-cmd12; - broken-cd; + non-removable; little-endian; bus-width = <4>; status = "disabled";
On the LS1028A this instance of the eSDHC controller is intended for either an eMMC or eSDIO card. It doesn't provide a card detect pin and its IO voltage is fixed at 1.8V. Remove the bogus broken-cd property, instead add the non-removable property. Fix the voltage-ranges property and set it to 1.8V only. Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts") Signed-off-by: Michael Walle <michael@walle.cc> --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)