@@ -661,6 +661,181 @@ static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}
+static int mtk_hw_pin_rsel_lookup(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg, u32 *rsel_val)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+ bool found = false;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (pullup) {
+ if (rsel[check].up_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ } else {
+ if (rsel[check].down_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ }
+ }
+ }
+
+ if (!found) {
+ dev_err(hw->dev, "Not support rsel value %d Ohm for pin = %d (%s)\n",
+ arg, desc->number, desc->name);
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_set_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err, rsel_val;
+
+ if (hw->rsel_si_unit) {
+ /* find pin rsel_index from pin_rsel array*/
+ err = mtk_hw_pin_rsel_lookup(hw, desc, pullup, arg, &rsel_val);
+ if (err)
+ goto out;
+ } else {
+ if (arg < MTK_PULL_SET_RSEL_000 ||
+ arg > MTK_PULL_SET_RSEL_111) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ rsel_val = arg - MTK_PULL_SET_RSEL_000;
+ }
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_RSEL, rsel_val);
+ if (err)
+ goto out;
+
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, MTK_ENABLE);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err = -EOPNOTSUPP;
+ u32 try_all_type;
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;
+
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_set_rsel(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc,
+ pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
+
+ if (err)
+ dev_err(hw->dev, "Invalid pull argument\n");
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
+
+static int mtk_rsel_get_si_unit(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 rsel_val, u32 *si_unit)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (rsel_val == rsel[check].rsel_index) {
+ if (pullup)
+ *si_unit = rsel[check].up_rsel;
+ else
+ *si_unit = rsel[check].down_rsel;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ int pu, pd, rsel, err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_RSEL, &rsel);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
+
+ if (pu == 0 && pd == 0) {
+ *pullup = 0;
+ *enable = MTK_DISABLE;
+ } else if (pu == 1 && pd == 0) {
+ *pullup = 1;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else if (pu == 0 && pd == 1) {
+ *pullup = 0;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else {
+ err = -EINVAL;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
@@ -742,44 +917,40 @@ static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}
-int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
- const struct mtk_pin_desc *desc,
- u32 pullup, u32 arg)
-{
- int err;
-
- err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
-
int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
{
- int err;
+ int err = -EOPNOTSUPP;
+ u32 try_all_type;
- err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;
- err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_get_rsel(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }
- err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc,
+ pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
-out:
return err;
}
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
@@ -17,6 +17,22 @@
#define MTK_ENABLE 1
#define MTK_PULLDOWN 0
#define MTK_PULLUP 1
+#define MTK_PULL_PU_PD_TYPE BIT(0)
+#define MTK_PULL_PULLSEL_TYPE BIT(1)
+#define MTK_PULL_PUPD_R1R0_TYPE BIT(2)
+/* MTK_PULL_RSEL_TYPE can select resistance and can be
+ * turned on/off itself. But it can't be selected pull up/down
+ */
+#define MTK_PULL_RSEL_TYPE BIT(3)
+/* MTK_PULL_PU_PD_RSEL_TYPE is a type which is controlled by
+ * MTK_PULL_PU_PD_TYPE and MTK_PULL_RSEL_TYPE.
+ */
+#define MTK_PULL_PU_PD_RSEL_TYPE (MTK_PULL_PU_PD_TYPE \
+ | MTK_PULL_RSEL_TYPE)
+#define MTK_PULL_TYPE_MASK (MTK_PULL_PU_PD_TYPE |\
+ MTK_PULL_PULLSEL_TYPE |\
+ MTK_PULL_PUPD_R1R0_TYPE |\
+ MTK_PULL_RSEL_TYPE)
#define EINT_NA U16_MAX
#define NO_EINT_SUPPORT EINT_NA
@@ -42,6 +58,14 @@
PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
_x_bits, 32, 1)
+#define PIN_RSEL(_s_pin, _e_pin, _rsel_index, _up_resl, _down_rsel) { \
+ .s_pin = _s_pin, \
+ .e_pin = _e_pin, \
+ .rsel_index = _rsel_index, \
+ .up_rsel = _up_resl, \
+ .down_rsel = _down_rsel, \
+ }
+
/* List these attributes which could be modified for the pin */
enum {
PINCTRL_PIN_REG_MODE,
@@ -67,6 +91,7 @@ enum {
PINCTRL_PIN_REG_DRV_E0,
PINCTRL_PIN_REG_DRV_E1,
PINCTRL_PIN_REG_DRV_ADV,
+ PINCTRL_PIN_REG_RSEL,
PINCTRL_PIN_REG_MAX,
};
@@ -129,6 +154,21 @@ struct mtk_pin_field_calc {
u8 fixed;
};
+/* struct mtk_pin_rsel - the structure that provides bias resistance selection.
+ * @s_pin: the start pin within the rsel range
+ * @e_pin: the end pin within the rsel range
+ * @rsel_index: the rsel bias resistance index
+ * @up_rsel: the pullup rsel bias resistance value
+ * @down_rsel: the pulldown rsel bias resistance value
+ */
+struct mtk_pin_rsel {
+ u16 s_pin;
+ u16 e_pin;
+ u16 rsel_index;
+ u32 up_rsel;
+ u32 down_rsel;
+};
+
/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
* determine which register the pin would make use of
* for certain pin attribute.
@@ -206,6 +246,9 @@ struct mtk_pin_soc {
bool ies_present;
const char * const *base_names;
unsigned int nbase_names;
+ const unsigned int *pull_type;
+ const struct mtk_pin_rsel *pin_rsel;
+ unsigned int npin_rsel;
/* Specific pinconfig operations */
int (*bias_disable_set)(struct mtk_pinctrl *hw,
@@ -254,6 +297,8 @@ struct mtk_pinctrl {
const char **grp_names;
/* lock pin's register resource to avoid multiple threads issue*/
spinlock_t lock;
+ /* identify rsel setting by si unit or rsel define in dts node */
+ bool rsel_si_unit;
};
void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set);
@@ -579,8 +579,9 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
unsigned int gpio, char *buf, unsigned int buf_len)
{
- int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
+ int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
const struct mtk_pin_desc *desc;
+ u32 try_all_type;
if (gpio >= hw->soc->npins)
return -EINVAL;
@@ -591,24 +592,39 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
pinmux -= hw->soc->nfuncs;
mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
- if (pullen == MTK_PUPD_SET_R1R0_00) {
- pullen = 0;
- r1 = 0;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_01) {
- pullen = 1;
- r1 = 0;
- r0 = 1;
- } else if (pullen == MTK_PUPD_SET_R1R0_10) {
- pullen = 1;
- r1 = 1;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+
+ if (hw->rsel_si_unit && (try_all_type & MTK_PULL_RSEL_TYPE)) {
+ rsel = pullen;
pullen = 1;
- r1 = 1;
- r0 = 1;
- } else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
- pullen = 0;
+ } else {
+ /* Case for: R1R0 */
+ if (pullen == MTK_PUPD_SET_R1R0_00) {
+ pullen = 0;
+ r1 = 0;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_01) {
+ pullen = 1;
+ r1 = 0;
+ r0 = 1;
+ } else if (pullen == MTK_PUPD_SET_R1R0_10) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 1;
+ }
+
+ /* Case for: RSEL */
+ if (pullen >= MTK_PULL_SET_RSEL_000 &&
+ pullen <= MTK_PULL_SET_RSEL_111) {
+ rsel = pullen - MTK_PULL_SET_RSEL_000;
+ pullen = 1;
+ }
}
len += scnprintf(buf + len, buf_len - len,
"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
@@ -626,6 +642,8 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
if (r1 != -1) {
len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
r1, r0);
+ } else if (rsel != -1) {
+ len += scnprintf(buf + len, buf_len - len, " (%1d)\n", rsel);
} else {
len += scnprintf(buf + len, buf_len - len, "\n");
}
@@ -970,6 +988,12 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
hw->nbase = hw->soc->nbase_names;
+ if (of_find_property(hw->dev->of_node,
+ "mediatek,rsel_resistance_in_si_unit", NULL))
+ hw->rsel_si_unit = true;
+ else
+ hw->rsel_si_unit = false;
+
spin_lock_init(&hw->lock);
err = mtk_pctrl_build_state(pdev);
This patch supports rsel(resistance selection) feature for I2C pins. It provides more resistance selection solution in different ICs. It provides rsel define and si unit solution by identifying "mediatek,rsel_resistance_in_si_unit" property in pio dtsi node. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> --- .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++--- .../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 45 ++++ drivers/pinctrl/mediatek/pinctrl-paris.c | 60 +++-- 3 files changed, 288 insertions(+), 48 deletions(-)