diff mbox series

[v3,13/17] clk: at91: sama7g5: remove prescaler part of master clock

Message ID 20210917120642.8993-14-claudiu.beznea@microchip.com (mailing list archive)
State New, archived
Headers show
Series clk: at91: updates for power management and dvfs | expand

Commit Message

Claudiu Beznea Sept. 17, 2021, 12:06 p.m. UTC 
On SAMA7G5 the prescaler part of master clock has been implemented as a
changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
been discovered that in some conditions the PMC_SR.MCKRDY is not rising
but the rate it provides it's stable. The workaround is to add a timeout
when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
will be removed from Linux clock tree as all the frequencies for CPU could
be obtained from PLL and also there will be less overhead when changing
frequency via DVFS.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/clk/at91/sama7g5.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index c72886681d74..aaa5769a8df1 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -1021,16 +1021,7 @@  static void __init sama7g5_pmc_setup(struct device_node *np)
 	}
 
 	parent_names[0] = "cpupll_divpmcck";
-	hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
-					   &mck0_layout, &mck0_characteristics,
-					   &pmc_mck0_lock,
-					   CLK_SET_RATE_PARENT, 0);
-	if (IS_ERR(hw))
-		goto err_free;
-
-	sama7g5_pmc->chws[PMC_CPU] = hw;
-
-	hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
+	hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck",
 					  &mck0_layout, &mck0_characteristics,
 					  &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5);
 	if (IS_ERR(hw))