diff mbox series

[v3,8/9] arm64: dts: mediatek: add mt7986a support

Message ID 20210924112017.14107-1-sam.shih@mediatek.com (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Sam Shih (史碩三) Sept. 24, 2021, 11:20 a.m. UTC
Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
 3 files changed, 282 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

Comments

Marc Zyngier Sept. 27, 2021, 12:41 p.m. UTC | #1
On 2021-09-24 12:20, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986a, include
> uart nodes with correct clocks, rng node with correct clock,
> and watchdog node and mt7986a pinctrl node.
> 
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware,
> 
> Add clock controller nodes, include 40M clock source, topckgen, 
> infracfg,
> apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
> v3: used the stdout-path instead of console=ttyS0
> v2: modified clock and uart node due to clock driver updated
> ---
>  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  54 +++++
>  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 227 +++++++++++++++++++
>  3 files changed, 282 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

[...]

> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		clock-frequency = <13000000>;

No. Please fix your firmware to program CNTFRQ_EL0 on all CPUs.
This may have been OK in 2011, but not anymore.

> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,
> +			      <0 0x0c080000 0 0x200000>;

This looks wrong. 128kB per redistributor frames and 4 CPUs do
no result in 2MB worth of MMIO.

This is also missing the GICV/GICV/GICH regions that are exposed
by the CPUs directly.

         M.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..e210d03ba70a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,54 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..dfe3e7101031
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,227 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};